The M18 FUEL™ 1/2" Compact Impact Wrench w/ Pin Detent is the most compact in its class, delivering you more power, the most access in tight spaces at only 4.9" in length, and maximum workspace visibility. This cordless impact wrench features a POWERSTATE™ Brushless motor that generates up to 250 ft-lbs of fastening and nut-busting torque, providing you with the power required for installation and removal, even in confined spaces. The MILWAUKEE® 1/2" impact wrench has tri-LEDs that surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL™ offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 20 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS™ Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The M18™ REDLITHIUM™ battery pack (not included) fits M18™ tools, delivering more work per charge and more work over the life of the pack.
Key Features:
- 4.9" in length provides most access in tight spaces
- Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows
- Auto shut-off mode prevents over tightening and increases productivity by applying no more than 20 ft-lbs. of torque
- Mode 1 RPMs: 0-900; Mode 2 RPMs: 0-1,650; Mode 3 RPMs: 0-2,400; Mode 4 RPMs: 0-2,400
- REDLINK PLUS™ Intelligence ensures maximum performance and protects from overloads, heating and over-discharge.
- Compatible with all M18™ batteries & Chargers
- The POWERSTATE™ brushless motor delivers up to 250 ft-lbs. of nut-busting torque.
- 4-Mode DRIVE CONTROL™ provides greater control over output speed and power. Includes auto shut-off and bolt-removal mode
- Bolt-removal mode offers more control after bolt breakaway as RPMs drastically slow down once the bolt is loosened.
- Mode 1 IPMs: 0-1,000; Mode 2 IPMs: 0-2,400; Mode 3 IPMs: 0-3,500; Mode 4 IPMs: 0-3,500
- Works in up to to 69kV environments
Kit includes;
1x - M18 FUEL™ 1/2 " Compact Impact Wrench w/ Pin Detent Bare Tool (2855P-20)
2x - M18™ REDLITHIUM™ XC5.0 Extended Capacity Battery Pack(48-11-1850)
1x - M18™ & M12™ Multi-Voltage Charger(48-59-1812)
1x - Carrying Case
Battery Specifications
| Voltage: | 18V | Battery Type: | 18 Volt Lithium Ion |
Product Specifications
| Wrench Type | Compact | Motor Type: | POWERSTATE™ Brushless |
| Anvil Type: | Detent Pin | peak Torque: | 250 ft/lbs |
| IPM: | 3500ipm | Nut Busting Torque: | 250(ft-lbs) |
| Maximum Torque: | 250 ft/lbs | Brushless: | Yes |
| Fastening Torque: | 250 ft/lbs | Battery System: | M18 |
| Nut-Busting Torque: | 250 ft/lbs | Chuck Type: | N/A |
| Tool Warranty: | 5 Year Limited Warranty | Drive Control: | 4-Mode w/ Auto Shut-Off Mode & Bolt Removal Mode |
| Power Source: | Cordless | Maximum RPM: | 2400 rpm |
| Height: | 7.95 in | Width: | 2.56 in |
| Length: | 4.9 in | Weight: | 3.9lbs |
The M18 FUEL™ 1/2" Compact Impact Wrench w/ Pin Detent is the most compact in its class, delivering you more power, the most access in tight spaces at only 4.9" in length, and maximum workspace visibility. This cordless impact wrench features a POWERSTATE™ Brushless motor that generates up to 250 ft-lbs of fastening and nut-busting torque, providing you with the power required for installation and removal, even in confined spaces. The MILWAUKEE® 1/2" impact wrench has tri-LEDs that surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL™ offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 20 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS™ Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The M18™ REDLITHIUM™ battery pack (not included) fits M18™ tools, delivering more work per charge and more work over the life of the pack.
Key Features:
- 4.9" in length provides most access in tight spaces
- Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows
- Auto shut-off mode prevents over tightening and increases productivity by applying no more than 20 ft-lbs. of torque
- Mode 1 RPMs: 0-900; Mode 2 RPMs: 0-1,650; Mode 3 RPMs: 0-2,400; Mode 4 RPMs: 0-2,400
- REDLINK PLUS™ Intelligence ensures maximum performance and protects from overloads, heating and over-discharge.
- Compatible with all M18™ batteries & Chargers
- The POWERSTATE™ brushless motor delivers up to 250 ft-lbs. of nut-busting torque.
- 4-Mode DRIVE CONTROL™ provides greater control over output speed and power. Includes auto shut-off and bolt-removal mode
- Bolt-removal mode offers more control after bolt breakaway as RPMs drastically slow down once the bolt is loosened.
- Mode 1 IPMs: 0-1,000; Mode 2 IPMs: 0-2,400; Mode 3 IPMs: 0-3,500; Mode 4 IPMs: 0-3,500
- Works in up to to 69kV environments
Kit includes;
1x - M18 FUEL™ 1/2 " Compact Impact Wrench w/ Pin Detent Bare Tool (2855P-20)
2x - M18™ REDLITHIUM™ XC5.0 Extended Capacity Battery Pack(48-11-1850)
1x - M18™ & M12™ Multi-Voltage Charger(48-59-1812)
1x - Carrying Case
Battery Specifications
| Voltage: | 18V | Battery Type: | 18 Volt Lithium Ion |
Product Specifications
| Wrench Type | Compact | Motor Type: | POWERSTATE™ Brushless |
| Anvil Type: | Detent Pin | peak Torque: | 250 ft/lbs |
| IPM: | 3500ipm | Nut Busting Torque: | 250(ft-lbs) |
| Maximum Torque: | 250 ft/lbs | Brushless: | Yes |
| Fastening Torque: | 250 ft/lbs | Battery System: | M18 |
| Nut-Busting Torque: | 250 ft/lbs | Chuck Type: | N/A |
| Tool Warranty: | 5 Year Limited Warranty | Drive Control: | 4-Mode w/ Auto Shut-Off Mode & Bolt Removal Mode |
| Power Source: | Cordless | Maximum RPM: | 2400 rpm |
| Height: | 7.95 in | Width: | 2.56 in |
| Length: | 4.9 in | Weight: | 3.9lbs |
