{"title":"Chance","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eShop CHANCE lineman tools and utility equipment from Lineroots Supply. Built for lineworkers, utility crews, contractors, apprentices, and professionals working at elevation, CHANCE Lineman Grade Tools are trusted for demanding overhead and underground electrical work.\u003c\/p\u003e","products":[{"product_id":"chance-epoxiglas™-chain-type-transformer-gin-with-standard-base","title":"Chance Epoxiglas™ Chain-Type Transformer Gin With Standard Base","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 90, 0);\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/ab-chance.png?v=1761770804\" alt=\"\" width=\"202\" height=\"73\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 90, 0);\"\u003eDescription:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eA versatile tool for hoisting distribution transformers and apparatus up the structure. The standard base unit is for mounting on clear pole sections. A wheel tightener and 36\" chain is a part of each unit. This model has a 2000 pound maximum rating, including hand pull force. With a single hoist line through a pulley on the gin and a sheave near the base of the structure, the lift load is 900 pounds (lift load plus the pull load equals the capacity). Using 4-4 blocks, the lift load can be 1,400 pounds. A swivel-hook block should always be used in the eye of the gin, and a sheave or a capstan near the bottom of the structure should be used to thread the handline through. Gins are not intended for applications involving side pull on the hoist line, or with the lift load in a tagged out position. That is, the load line should be parallel to the gin pole. Pole length: 26 inches.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 90, 0);\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStandard base unit is for mounting on clear pole sections\u003c\/li\u003e\n\u003cli\u003eWheel tightener and 36\" chain are part of each unit\u003c\/li\u003e\n\u003cli\u003eStandard and extended-base models feature 2000-lb. maximum ratings, including hand pull force\u003c\/li\u003e\n\u003cli\u003e900-lb. lift load with single hoist line through a pulley on the gin and a sheave near the base of structure (lift load plus pull load equals capacity)\u003c\/li\u003e\n\u003cli\u003eLift load can be 1,400 lbs., using 4-4 blocks\u003c\/li\u003e\n\u003cli\u003ePole length is 26 inches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 90, 0);\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBase Type: Standard\u003c\/li\u003e\n\u003cli\u003eEU RoHS Indicator: No\u003c\/li\u003e\n\u003cli\u003eStyle: Chain Binder\u003c\/li\u003e\n\u003cli\u003eType: Gin\u003c\/li\u003e\n\u003cli\u003eUPC: 096359016403\u003c\/li\u003e\n\u003cli\u003eLength: 27.75 in\u003c\/li\u003e\n\u003cli\u003eWeight: 14.7 lb (6.7 kg)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Chance","offers":[{"title":"Default Title","offer_id":45841750884505,"sku":"C4000090","price":947.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/e29297a09bdbaaf2de5574e8ce85a462fd770927-large.png?v=1761770740"},{"product_id":"fixed-length-grip-all-sticks","title":"AB Chance Fixed Length Grip-All Sticks","description":"\u003cp\u003eThe most versatile tool in a lineworker’s hands, the AB Chance Grip-All stick puts an easy-to-control “finger” on an insulated pole. Although primarily designed for installing hot-line and grounding clamps, it serves both overhead and underground circuits with various end fittings. Commonly called a “shotgun,” the operating mechanism incorporates a sliding handgrip that opens the hook to grasp a clamp eye-screw and retract it into the tool head.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eExternal Operating Rod Type\u003c\/li\u003e \u003cli\u003eTested per OSHA \u0026amp; ASTM F711\u003c\/li\u003e \u003cli\u003eVersatile tool puts an easy-to-control “finger” on an insulated pole\u003c\/li\u003e \u003c\/ul\u003e\u003cbr\u003e\u003ch4\u003eAB Chance Fixed Length Grip-All Sticks\u003c\/h4\u003e \u003cp\u003eA thumb latch then must be depressed to release the locked hand grip so it can open the hook. While the tool head is of Lexan® for close-quarter operations, the worker must maintain recommended working distance solely on the Epoxiglas® pole section of the handle as the hook and its actuator are metal parts. Easy to care for, Grip-All sticks do not require field stripping to clean. All insulated parts including the operating rod are outside the main pole, readily accessible to wipe dry. CAUTION: Do not clean the plastic head with solvent.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eExternal Operating Rod Type\u003c\/li\u003e \u003cli\u003eTested per OSHA \u0026amp; ASTM F711\u003c\/li\u003e \u003cli\u003eVersatile tool puts an easy-to-control “finger” on an insulated pole\u003c\/li\u003e \u003cli\u003ePrimarily designed for installing hot-line and grounding clamps\u003c\/li\u003e \u003cli\u003eAlso serves both overhead and underground circuits with various end fittings\u003c\/li\u003e \u003cli\u003eOperating mechanism (or “shotgun”) incorporates a sliding hand grip that opens the hook to grasp a clamp eyescrew and retract it into tool head\u003c\/li\u003e \u003cli\u003eLatch must be depressed to release locked hand grip that opens the hook\u003c\/li\u003e \u003cli\u003eFor smooth operation, investment-cast stainless-steel components include Jaw, Jaw Holder, Safety Stop, Lockbar and Latch\u003c\/li\u003e \u003cli\u003eLexan® tool head is designed for close-quarter operations\u003c\/li\u003e \u003cli\u003eWorker must maintain recommended work distance based solely on the Epoxiglas ™ pole section of the handle, as the hook and its actuator are metal parts\u003c\/li\u003e \u003cli\u003eEasy-care Grip-All Clampsticks do not require field stripping to clean\u003c\/li\u003e \u003cli\u003eAll insulated parts, including the operating rod, are outside the main pole, readily accessible to wipe dry\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eTool Manuals \u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e","brand":"Chance","offers":[{"title":"4'9\" \/ No Universal Fitting","offer_id":48989551493273,"sku":"ABC4030291","price":347.27,"currency_code":"USD","in_stock":true},{"title":"6'8\" \/ Universal Fitting","offer_id":48989551526041,"sku":"ABC4030292A","price":394.59,"currency_code":"USD","in_stock":true},{"title":"6'8\" \/ No Universal Fitting","offer_id":48989551558809,"sku":"ABC4030292","price":399.29,"currency_code":"USD","in_stock":true},{"title":"8'7\" \/ Universal Fitting","offer_id":48989551591577,"sku":"ABC4030293A","price":431.08,"currency_code":"USD","in_stock":true},{"title":"8'7\" \/ No Universal Fitting","offer_id":48989551624345,"sku":"ABC4030293","price":438.39,"currency_code":"USD","in_stock":true},{"title":"10'7\" \/ Universal Fitting","offer_id":48989551657113,"sku":"ABC4030294A","price":573.92,"currency_code":"USD","in_stock":true},{"title":"10'7\" \/ No Universal Fitting","offer_id":48989551689881,"sku":"ABC4030294","price":478.61,"currency_code":"USD","in_stock":true},{"title":"12'7\" \/ No Universal Fitting","offer_id":48989551722649,"sku":"ABC4030295","price":542.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/ab-chance-gripall-stick-1-600x600_a0322b01-fbf1-4af6-8b17-7a39316b6aa1.png?v=1788755918"},{"product_id":"chance","title":"Chance- H18761 Phasing Tester with Hook Probes, Case and Manual (16kV)","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 90, 0);\"\u003e\u003cimg height=\"73\" width=\"202\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/ab-chance.png?v=1761770804\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 90, 0);\"\u003eDescription:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eChance Phasing Testers easily determine phase relationships and approximate voltage, line-to-line or line-to-ground. Each tester consists of two fiberglass poles with end fittings threaded for interchangeable probes. The probe fittings couple with a high-impedance component encased in each pole. To complete the test circuit, a 22-foot length of insulated flexible cable stores on the reel affixed to one pole and connects to the voltmeter on the other pole. Simple to operate, the probes can be brought into contact with the conductors appropriate for the meter to read phase-to-phase or phase-to-ground voltage.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 90, 0);\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDetermine phase relationships and approximate voltage, line-to-line or line-to-ground\u003c\/li\u003e\n\u003cli\u003eFeature two fiberglass poles with end fittings threaded for interchangeable probes\u003c\/li\u003e\n\u003cli\u003eProbe fittings couple with a high-impedance component encased in each pole\u003c\/li\u003e\n\u003cli\u003eTo complete test circuit, a 22 ft. length of insulated flexible cable stores on reel affixed to one pole and connects to voltmeter on other pole\u003c\/li\u003e\n\u003cli\u003eSimple to operate, tester poles first attach to two 6 ft. Epoxiglas® insulating universal handles (included in each kit for proper working clearances)\u003c\/li\u003e\n\u003cli\u003eProbes can be brought into contact with conductors appropriate for the meter to read phase-to-phase or phase-to-ground voltage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 90, 0);\"\u003e\u003cstrong\u003eSingle Range Units:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor convenience on different systems, toggle on dual-range units can switch calibration between two scales on meter face\u003c\/li\u003e\n\u003cli\u003eCan improve readability for low-end values on Hi scale\u003c\/li\u003e\n\u003cli\u003eSwitched to Lo range, those values deflect needle more to give more finite readings for secondary and DC hi-potting\u003c\/li\u003e\n\u003cli\u003eTo check instrument before and after each use, test-point jack in front of meter accepts plug from Phasing Meter Tester\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 90, 0);\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003cmeta charset=\"utf-8\"\u003e\n\u003ctable class=\"data table additional-attributes\" id=\"product-attribute-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth class=\"col label\" scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Weight\"\u003e24.000000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col label\" scope=\"row\"\u003eProduct Includes\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Product Includes\"\u003eIncludes Hook Probes, Case and Manual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col label\" scope=\"row\"\u003eSpecifications\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Specifications\"\u003e\n\u003ch4 class=\"sub-title\"\u003eGeneral\u003c\/h4\u003e\n\u003ctable class=\"table table-bordered table-striped\"\u003e\n\u003ccolgroup\u003e\n\u003ccol width=\"50%\"\u003e\n\u003ccol width=\"50%\"\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"attrib\"\u003eStyle\u003c\/td\u003e\n\u003ctd\u003eAnalog Dial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"attrib\"\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e096359039310\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 class=\"sub-title\"\u003eDimensions\u003c\/h4\u003e\n\u003ctable class=\"table table-bordered table-striped\"\u003e\n\u003ccolgroup\u003e\n\u003ccol width=\"50%\"\u003e\n\u003ccol width=\"50%\"\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"attrib\"\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e23.0 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 class=\"sub-title\"\u003eElectrical Ratings\u003c\/h4\u003e\n\u003ctable class=\"table table-bordered table-striped\"\u003e\n\u003ccolgroup\u003e\n\u003ccol width=\"50%\"\u003e\n\u003ccol width=\"50%\"\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"attrib\"\u003eWithstand Voltage\u003c\/td\u003e\n\u003ctd\u003e16kV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col label\" scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Manufacturer\"\u003eChance Hubbell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col label\" scope=\"row\"\u003eMPN\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"MPN\"\u003eH18761\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col label\" scope=\"row\"\u003eupc code\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"upc code\"\u003e096359039310\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Chance","offers":[{"title":"Default Title","offer_id":46078251499673,"sku":"H18761","price":2895.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/unnamed_0f96f50b-c50d-4ecb-9630-976b5a366d2c.jpg?v=1768072102"},{"product_id":"chance-1-ton-chain-hoist-ratchet-link-5-5-lift","title":"CHANCE 1 Ton Chain Hoist, Ratchet Link, 5.5′ Lift","description":"\u003cp class=\"rich-text-wrapper text-gray-500 mb-4\"\u003e1 Ton Chain Hoist featuring a 20″ handle, 5.5′ lift, a 90 lb. handle pull, and an 11″ minimum hook-to-hook distance.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eEnhanced Safety with Enclosed Mechanism: All components are securely enclosed within the housing, ensuring operator safety\u003c\/li\u003e \u003cli\u003eDurable Alloy Steel Chain: Polished, high-strength alloy steel chain designed for smooth operation and low wear\u003c\/li\u003e \u003cli\u003e360˚ Swiveling Forged Steel Load Hooks: Equipped with robust, forged steel hooks that swivel 360 degrees, complemented by secure spring-loaded latches\u003c\/li\u003e \u003cli\u003eAutomatic Load-Locking Controls: Safety-enhanced controls that automatically lock into place when the hoist is under load, preventing accidental release\u003c\/li\u003e \u003cli\u003eMaintenance-Free Bearings: Lifetime oil-impregnated bronze sleeve bearings deliver smooth operation without the need for additional lubrication, reducing upkeep\u003c\/li\u003e \u003c\/ul\u003e\u003cbr\u003e\u003ch3\u003eCHANCE 1 Ton Chain Hoist, Ratchet Link, 5.5′ Lift\u003c\/h3\u003e \u003cdiv class=\"mb-4\" data-v-d8cfefae=\"\"\u003e \u003cp data-v-d8cfefae=\"\"\u003eChance 1 Ton Chain Hoists’ precision engineering and robust construction make it a preferred choice for professionals seeking reliable and efficient load-handling equipment. Each unit is meticulously proof-tested and operated at 150% of its capacity rating to ensure unmatched safety and performance. The hoist features lightweight, high-strength handle and sheave housings made from heat-treated aluminum, offering both durability and ease of handling. The ratchet handle is ingeniously designed to swing to either side, enabling effortless operation in confined spaces and supporting both push and pull stroke maneuvers.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"mb-4\" data-v-d8cfefae=\"\"\u003e \u003cul\u003e \u003cli\u003eEnhanced Safety with Enclosed Mechanism: All components are securely enclosed within the housing, ensuring operator safety\u003c\/li\u003e \u003cli\u003eDurable Alloy Steel Chain: Polished, high-strength alloy steel chain designed for smooth operation and low wear\u003c\/li\u003e \u003cli\u003e360˚ Swiveling Forged Steel Load Hooks: Equipped with robust, forged steel hooks that swivel 360 degrees, complemented by secure spring-loaded latches\u003c\/li\u003e \u003cli\u003eAutomatic Load-Locking Controls: Safety-enhanced controls that automatically lock into place when the hoist is under load, preventing accidental release\u003c\/li\u003e \u003cli\u003eMaintenance-Free Bearings: Lifetime oil-impregnated bronze sleeve bearings deliver smooth operation without the need for additional lubrication, reducing upkeep\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e \u003cp data-v-d8cfefae=\"\"\u003eChance’s 1 Ton Chain Hoist stands out in the market with its robust construction, advanced safety features, and user-friendly design, making it an indispensable tool for industries that demand reliable load-handling solutions. The link hoist is equipped with two intuitively designed levers—the Shift Key for vertical movement located on the top of the housing and the Release Key in the handle recess—both of which are easy to switch even when wearing gloves. Whether for daily operations or occasional heavy lifting, this ratchet hoist delivers performance you can trust, backed by a century of engineering excellence.\u003c\/p\u003e \u003cp data-v-d8cfefae=\"\"\u003eSpec Sheet \u003c\/p\u003e","brand":"Chance","offers":[{"title":"Default Title","offer_id":48989550379161,"sku":"AB3011S","price":874.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/AB3011S.jpg?v=1788755882"},{"product_id":"ab-chance-elbow-puller-for-grip-all","title":"AB Chance Elbow Puller for Grip-All, 15KV Grippers","description":"\u003cp\u003eThe Chance Elbow Puller for Grip-Alls are designed to be used with any grip-all for installing or removing URD elbows. The 15kV grippers help grip firmly to prevent elbow ring damage.\u003c\/p\u003e \u003cp\u003eContact us if you have any questions.\u003c\/p\u003e\u003cbr\u003e\u003ch3\u003eAB Chance Elbow Puller for Grip-All, 15KV Grippers\u003c\/h3\u003e \u003cp\u003eUsed to install or remove elbow connectors from bushings of transformers. The integral hook on the the tool fits through the rubber eye of an elbow or the metal hook of a bushing cap adding extra control and pulling power to the grippers.\u003c\/p\u003e","brand":"Chance","offers":[{"title":"Default Title","offer_id":48989550411929,"sku":"ABC4030698","price":236.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/C4030698.png?v=1788755884"},{"product_id":"duckbill-type-grounding-clamps-1162","title":"Duckbill-Type Grounding Clamp, Type I-Class A-Grade 5, 1.162″ Jaw Opening","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eAluminum body duckbill grounding clamp.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003eContact Us to order or for more information.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e\u003cbr\u003e\u003ch3\u003eDuckbill-Type Grounding Clamps\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDuckbill Ground Clamp\u003c\/li\u003e \u003cli\u003eContinuous Current 400A\u003c\/li\u003e \u003cli\u003eFault Current 43kA for 15 cycles or 30kA for 30 cycles\u003c\/li\u003e \u003cli\u003eMain Line Range Max. 566kcmil CU or 900kcmil ACSR (1.162″)\u003c\/li\u003e \u003cli\u003eMain Line Range Min. #6 Sol. CU (0.162″)\u003c\/li\u003e \u003cli\u003eJumper Range Max. 4\/0 Grd. Cable\u003c\/li\u003e \u003cli\u003eJumper Range Min. #2 Grd. Cable\u003c\/li\u003e \u003cli\u003eASTM Type I, Class A, Grade 5\u003c\/li\u003e \u003cli\u003eIEC Rating 35kA (15 cycles)\u003c\/li\u003e \u003cli\u003eJaws Smooth\u003c\/li\u003e \u003cli\u003eFerrule Plain-Plug\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eCatalog \u003c\/p\u003e","brand":"Chance","offers":[{"title":"Default Title","offer_id":48989550444697,"sku":"ABG36221","price":107.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/ABG36221.jpg?v=1788755887"},{"product_id":"chance-bushing-adapter-15-25-35-kv","title":"CHANCE Bushing Adapter 15, 25, \u0026 35 kV","description":"\u003cp class=\"rich-text-wrapper text-gray-500 mb-4\"\u003e15, 25, 35kV Bushing Adapter. For testing live-front URD equipment. Can be used with Chance Auto-Ranging Voltage Indicator.\u003c\/p\u003e","brand":"Chance","offers":[{"title":"Default Title","offer_id":48989550477465,"sku":"ABT4030857","price":510.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/ABT4030857.jpg?v=1788755890"},{"product_id":"chance-elbow-adapter-15-25-35-kv","title":"CHANCE Elbow Adapter 15, 25, \u0026 35 kV","description":"\u003cp class=\"rich-text-wrapper text-gray-500 mb-4\"\u003e15, 25, 35kV Elbow Adapter. For testing live-front URD equipment. Can be used with Chance Auto-Ranging Voltage Indicator.\u003c\/p\u003e","brand":"Chance","offers":[{"title":"Default Title","offer_id":48989550543001,"sku":"ABT4030856","price":558.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/ABT4030856.jpg?v=1788755892"},{"product_id":"chance-crossarm-link-sticks","title":"CHANCE Crossarm Link Sticks","description":"\u003cp\u003eThe Crossarm Link Stick hooks over a dead-end crossarm (up to 3.75 in x 4.75 in) on one end and provides a butt swivel on the other end that allows for connection with a hoist for the purpose of providing quick set-up for tension relief to a dead-end insulator or other component. No hassles connecting a sling.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eQuick and easy set up, no sling necessary\u003c\/li\u003e \u003cli\u003ePlastisol-coated steel hook\u003c\/li\u003e \u003cli\u003eFits standard 3-3\/4″ x 4-3\/4″ crossarms with 5″ hook\u003c\/li\u003e \u003c\/ul\u003e\u003cbr\u003e\u003ch3\u003eCHANCE Crossarm Link Sticks\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eQuick and easy set up, no sling necessary\u003c\/li\u003e \u003cli\u003ePlastisol-coated steel hook\u003c\/li\u003e \u003cli\u003eFits standard 3-3\/4″ x 4-3\/4″ crossarms with 5″ hook\u003c\/li\u003e \u003cli\u003eGalvanized steel swivel eye on conductor end for easy alignment\u003c\/li\u003e \u003cli\u003eLifting eye on hook fitting for easy positioning by a hot line tool\u003c\/li\u003e \u003cli\u003eInsulated Epoxiglas ™ length: 21.5″\u003c\/li\u003e \u003cli\u003etotal length: 41″\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eSpec Sheet \u003c\/p\u003e","brand":"Chance","offers":[{"title":"1,500lbs","offer_id":48989550608537,"sku":"ABPSC4004132","price":442.26,"currency_code":"USD","in_stock":true},{"title":"3,500lbs","offer_id":48989550641305,"sku":"ABPSC4004372","price":577.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/HPS_ID_PSC4004132_PRODIMAGE_1200-600x600.jpg?v=1788755894"},{"product_id":"chance-flat-face-ground-clamp-5h","title":"CHANCE Flat-Face Ground Clamp w\/Eye Screw, 5H","description":"\u003cp\u003e5H Flat-Face Ground Clamp, light-weight Aluminum body, with eye screw\u003c\/p\u003e \u003cul\u003e \u003cli\u003eGrade 5H Rated\u003c\/li\u003e \u003cli\u003eRated 47kA with X\/R = 30\u003c\/li\u003e \u003c\/ul\u003e\u003cbr\u003e\u003ch3\u003eCHANCE Flat-Face Ground Clamp w\/Eye Screw, 5H\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eGrade 5H Rated\u003c\/li\u003e \u003cli\u003eRated 47kA with X\/R = 30\u003c\/li\u003e \u003cli\u003eFirst cycle current peak = 127 kA\u003c\/li\u003e \u003cli\u003eLast cycle current peak = 70 kA\u003c\/li\u003e \u003cli\u003eTest duration = 15 cycles\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eSpec Sheet \u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e","brand":"Chance","offers":[{"title":"Default Title","offer_id":48989550674073,"sku":"ABPSC6003636","price":198.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/HPS_ID_PSC6003636_PRODIMAGE_515.jpg?v=1788755897"},{"product_id":"chance-combination-swivel-wireholder-sheave-3-diameter-jib","title":"CHANCE Combination Swivel Wireholder\/Sheave, 3″ Diameter Jib","description":"\u003cp\u003eCombination Swivel Wireholder \/ Sheave For ALTEC ® Trucks with 3″ Diameter Jib. Eliminates changeovers from wireholder (for picking up a phase conductor) to Rope Sheave (for lifting items). Unit attaches directly to jib.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eEliminates changeovers from Wireholder (for picking up a phase conductor) to Rope Sheave (for lifting items)\u003c\/li\u003e \u003cli\u003eEach combination unit attaches directly to jib\u003c\/li\u003e \u003cli\u003eRated Working Load: Wireholder – 300 lbs. Sheave – 800 lbs.\u003c\/li\u003e \u003cli\u003eBoth units feature a Large Swivel Type Roller Wireholder with 2-½” x 3-3⁄8″ opening and a 7″-dia. Sheave to accept up to 3⁄4″-dia. rope\u003c\/li\u003e \u003c\/ul\u003e\u003cbr\u003e\u003ch3\u003eCHANCE Combination Swivel Wireholder\/Sheave, 3″ Diameter Jib\u003c\/h3\u003e \u003cp class=\"rich-text-wrapper mb-4\" data-v-80eb50e3=\"\"\u003eCombination Swivel Wireholder \/ Sheave For ALTEC ® Trucks with 3″ Diameter Jib. Eliminates changeovers from wireholder (for picking up a phase conductor) to Rope Sheave (for lifting items). Unit attaches directly to jib. Rated working load: Wireholder – 300lbs. Sheave – 800lbs. Features a large swivel-type roller wireholder with 2-1\/2″ x 3-3\/8″ opening and a 7″ dia sheave to accept up to 3\/4″ dia rope.\u003c\/p\u003e \u003cdiv class=\"rich-text-wrapper mb-4\" data-v-80eb50e3=\"\"\u003e \u003cul\u003e \u003cli\u003eEliminates changeovers from Wireholder (for picking up a phase conductor) to Rope Sheave (for lifting items)\u003c\/li\u003e \u003cli\u003eEach combination unit attaches directly to jib\u003c\/li\u003e \u003cli\u003eRated Working Load: Wireholder – 300 lbs. Sheave – 800 lbs.\u003c\/li\u003e \u003cli\u003eBoth units feature a Large Swivel Type Roller Wireholder with 2-½” x 3-3⁄8″ opening and a 7″-dia. Sheave to accept up to 3⁄4″-dia. rope\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e \u003c\/div\u003e \u003cp\u003eSpec Sheet \u003c\/p\u003e","brand":"Chance","offers":[{"title":"Default Title","offer_id":48989550706841,"sku":"ABT4002529","price":1592.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/HPS_ID_T4002529_alt1_PRODIMAGE_515.jpg?v=1788755899"},{"product_id":"chance-3-diameter-insulated-jib","title":"CHANCE 3″- Diameter Insulated Jib for Altec trucks","description":"\u003cp\u003eThe Chance Insulated Jib Extension for Altec trucks is 3IN X 36.69IN with 7 holes. WLL: 1,000lbs.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e3 in x 36.69 in (76.2 mm x 931.92 mm)\u003c\/li\u003e \u003cli\u003eRated working load limit: 1,000 lb. (453 kg)\u003c\/li\u003e \u003cli\u003e7 hole locations for pinning\u003c\/li\u003e \u003c\/ul\u003e\u003cbr\u003e\u003ch3\u003eCHANCE 3″- Diameter Insulated Jib for Altec trucks\u003c\/h3\u003e \u003cp\u003eSpec Sheet \u003c\/p\u003e","brand":"Chance","offers":[{"title":"Default Title","offer_id":48989550739609,"sku":"ABT4001525","price":636.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/HPS_ID_T4001525_PRODIMAGE_515.jpg?v=1788755901"},{"product_id":"combo-swivel-wireholder-4-square-jib","title":"CHANCE Combination Swivel Wireholder\/Sheave, 4″ x 4″ square jib","description":"\u003cp\u003eCombination Swivel Wireholder \/ Sheave For ALTEC Trucks, 4″ x 4″ Square Jib. Eliminates changeovers from wireholder (for picking up a phase conductor) to Rope Sheave (for lifting items). Unit attaches directly to jib.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eEliminates changeovers from Wireholder (for picking up a phase conductor) to Rope Sheave (for lifting items)\u003c\/li\u003e \u003cli\u003eEach combination unit attaches directly to jib\u003c\/li\u003e \u003c\/ul\u003e\u003cbr\u003e\u003ch3\u003eCHANCE Combination Swivel Wireholder\/Sheave, 4″ x 4″ square jib\u003c\/h3\u003e \u003cp class=\"rich-text-wrapper mb-4\" data-v-80eb50e3=\"\"\u003eCombination Swivel Wireholder \/ Sheave For ALTEC ® Trucks with 4″ x 4″ Square Jib.\u003c\/p\u003e \u003cdiv class=\"rich-text-wrapper mb-4\" data-v-80eb50e3=\"\"\u003e \u003cul\u003e \u003cli\u003eEliminates changeovers from Wireholder (for picking up a phase conductor) to Rope Sheave (for lifting items)\u003c\/li\u003e \u003cli\u003eEach combination unit attaches directly to jib\u003c\/li\u003e \u003cli\u003eRated Working Load: Wireholder – 300 lbs. Sheave – 800 lbs.\u003c\/li\u003e \u003cli\u003eBoth units feature a Large Swivel Type Roller Wireholder with 2-½” x 3-3⁄8″ opening and a 7″-dia. Sheave to accept up to 3⁄4″-dia. rope\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e \u003c\/div\u003e \u003cp\u003eSpec Sheet \u003c\/p\u003e","brand":"Chance","offers":[{"title":"Default Title","offer_id":48989550772377,"sku":"ABT4002530","price":2000.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/HPS_ID_T4002530_PRODIMAGE_515.jpg?v=1788755905"},{"product_id":"chance-wire-puller-hook","title":"CHANCE Wire Puller Hook","description":"\u003cp\u003eThe Chance Wire Puller Hook fits most popular porcelain or polymer deadend insulators. For use in cutting deadends and pulling slack on automatic deadends.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eHolds the insulator and deadend assembly directly in line with the conductor, eliminating the need to hold the insulator up with an insulator fork when inserting wire into the automatic deadend\u003c\/li\u003e \u003cli\u003eCan be applied by hand or with hot stick\u003c\/li\u003e \u003cli\u003eMaximum rated load of 3500 lbs. (1,587kg)\u003c\/li\u003e \u003c\/ul\u003e\u003cbr\u003e\u003ch3\u003eCHANCE Wire Puller Hook\u003c\/h3\u003e \u003cp\u003eSpec Sheet \u003c\/p\u003e","brand":"Chance","offers":[{"title":"Default Title","offer_id":48989550805145,"sku":"ABWPH3","price":134.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/HPS_ID_586365_PRODIMAGE_515.jpg?v=1788755906"},{"product_id":"chance-universal-poles","title":"CHANCE Universal Poles","description":"\u003cp\u003e1-1\/4″ Diameter Poles. Designed for use as a Hotstick handle for Universal Tools, Chance Universal Poles are made of Epoxiglas® and lightweight aluminum castings. The Universal Tools shown on the following pages fit under the thumbscrew of the spline on the Universal Pole. For job versatility, the splines allow angling the tool up to 90˚ depending upon the individual tool design. Universal Adapter M4455-84 may be added between the pole and tool to gain any angle desired.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eTested per OSHA \u0026amp; ASTM F711\u003c\/li\u003e \u003cli\u003eDesigned for use as a hotstick handle for Universal Tools\u003c\/li\u003e \u003cli\u003eMade with Epoxiglas® and lightweight aluminum castings\u003c\/li\u003e \u003c\/ul\u003e\u003cbr\u003e\u003ch3\u003eCHANCE Universal Poles\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eTested per OSHA \u0026amp; ASTM F711\u003c\/li\u003e \u003cli\u003eDesigned for use as a hotstick handle for Universal Tools\u003c\/li\u003e \u003cli\u003eMade with Epoxiglas® and lightweight aluminum castings\u003c\/li\u003e \u003cli\u003eSplines allow angling the tool up to 90° depending on individual tool design\u003c\/li\u003e \u003cli\u003eUniversal Adapter M445584 may be added between the pole and tool to gain any angled desired\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e","brand":"Chance","offers":[{"title":"6' \/ One Universal End","offer_id":48989550837913,"sku":"ABH17601","price":162.69,"currency_code":"USD","in_stock":true},{"title":"6' \/ Two Universal Ends","offer_id":48989550870681,"sku":"ABH17603","price":192.15,"currency_code":"USD","in_stock":true},{"title":"8' \/ One Universal End","offer_id":48989550903449,"sku":"ABH1760","price":197.58,"currency_code":"USD","in_stock":true},{"title":"8' \/ Two Universal Ends","offer_id":48989550936217,"sku":"ABH17604","price":217.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/HPS_PPHID_249865_1200-600x600.webp?v=1788755909"},{"product_id":"hinged-style-grip-all-sticks","title":"AB Chance Hinged Style Grip-All Sticks","description":"\u003cp\u003eThe most versatile tool in a lineworker’s hands, the AB Chance Hinged-Style Grip-All stick puts an easy-to-control “finger” on an insulated pole. Although primarily designed for installing hot-line and grounding clamps, it serves both overhead and underground circuits with various end fittings. Commonly called a “shotgun,” the operating mechanism incorporates a sliding handgrip that opens the hook to grasp a clamp eye-screw and retract it into the tool head.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eExternal Operating Rod Type\u003c\/li\u003e \u003cli\u003eTested per OSHA \u0026amp; ASTM F711\u003c\/li\u003e \u003cli\u003eVersatile tool puts an easy-to-control “finger” on an insulated pole\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e\u003cbr\u003e\u003ch4\u003eAB Chance Hinged Style Grip-All Sticks\u003c\/h4\u003e \u003cp\u003eA thumb latch then must be depressed to release the locked hand grip so it can open the hook. While the tool head is of Lexan® for close-quarter operations, the worker must maintain recommended working distance solely on the Epoxiglas® pole section of the handle as the hook and its actuator are metal parts. Easy to care for, Grip-All sticks do not require field stripping to clean. All insulated parts including the operating rod are outside the main pole, readily accessible to wipe dry. CAUTION: Do not clean the plastic head with solvent.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eExternal Operating Rod Type\u003c\/li\u003e \u003cli\u003eTested per OSHA \u0026amp; ASTM F711\u003c\/li\u003e \u003cli\u003eVersatile tool puts an easy-to-control “finger” on an insulated pole\u003c\/li\u003e \u003cli\u003ePrimarily designed for installing hot-line and grounding clamps\u003c\/li\u003e \u003cli\u003eAlso serves both overhead and underground circuits with various end fittings\u003c\/li\u003e \u003cli\u003eOperating mechanism (or “shotgun”) incorporates a sliding hand grip that opens the hook to grasp a clamp eyescrew and retract it into tool head\u003c\/li\u003e \u003cli\u003eLatch must be depressed to release locked hand grip that opens the hook\u003c\/li\u003e \u003cli\u003eFor smooth operation, investment-cast stainless-steel components include Jaw, Jaw Holder, Safety Stop, Lockbar and Latch\u003c\/li\u003e \u003cli\u003eLexan® tool head is designed for close-quarter operations\u003c\/li\u003e \u003cli\u003eWorker must maintain recommended work distance, based solely on the Epoxiglas® pole section of the handle, as the hook and its actuator are metal parts\u003c\/li\u003e \u003cli\u003eEasy-care Grip-All Clampsticks do not require field stripping to clean\u003c\/li\u003e \u003cli\u003eAll insulated parts, including the operating rod, are outside the main pole, readily accessible to wipe dry\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eHinged_Grip-all \u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e","brand":"Chance","offers":[{"title":"6'9\"","offer_id":48989550968985,"sku":"ABC4030296","price":638.72,"currency_code":"USD","in_stock":true},{"title":"8'8\"","offer_id":48989551001753,"sku":"ABC4030297","price":674.76,"currency_code":"USD","in_stock":true},{"title":"10'8\"","offer_id":48989551034521,"sku":"ABC4030298","price":710.08,"currency_code":"USD","in_stock":true},{"title":"12'8\"","offer_id":48989551067289,"sku":"ABC4030299","price":768.0,"currency_code":"USD","in_stock":true},{"title":"14'8\"","offer_id":48989551100057,"sku":"ABC4030342","price":776.21,"currency_code":"USD","in_stock":true},{"title":"16'8\"","offer_id":48989551132825,"sku":"ABC4030343","price":810.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/ab-chance-hinged-gripall-stick-600x600.png?v=1788755912"},{"product_id":"ab-chance-telescoping-grip-all-sticks","title":"AB Chance Telescoping Grip-All Sticks","description":"\u003cp\u003eThe most versatile tool in a lineworker’s hands, the AB Chance Telescoping Grip-All stick puts an easy-to-control “finger” on an insulated pole. Although primarily designed for installing hot-line and grounding clamps, it serves both overhead and underground circuits with various end fittings.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eTested per OSHA \u0026amp; ASTM F711\u003c\/li\u003e \u003cli\u003eDesign features rotating coupler and an engineered positive-lock button with safety stop to keep sections from parting or hook releasing while in use\u003c\/li\u003e \u003cli\u003eMechanism locks sections into a solid, rattle-free tool\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e\u003cbr\u003e\u003ch4\u003eAB Chance Telescoping Grip-All Sticks\u003c\/h4\u003e \u003cp\u003eCommonly called a “shotgun,” the operating mechanism incorporates a sliding handgrip that opens the hook to grasp a clamp eye-screw and retract it into the tool head. A thumb latch then must be depressed to release the locked hand grip so it can open the hook. While the tool head is of Lexan® for close-quarter operations, the worker must maintain recommended working distance solely on the Epoxiglas® pole section of the handle as the hook and its actuator are metal parts.\u003c\/p\u003e \u003cp\u003eEasy to care for, Grip-All sticks do not require field stripping to clean. All insulated parts including the operating rod are outside the main pole, readily accessible to wipe dry. CAUTION: Do not clean the plastic head with solvent.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eTested per OSHA \u0026amp; ASTM F711\u003c\/li\u003e \u003cli\u003eDesign features rotating coupler and an engineered positive-lock button with safety stop to keep sections from parting or hook releasing while in use\u003c\/li\u003e \u003cli\u003eMechanism locks sections into a solid, rattle-free tool\u003c\/li\u003e \u003cli\u003eBlack head makes it obvious head is not included in minimum approach distance\u003c\/li\u003e \u003cli\u003eCan replace several conventional clampsticks\u003c\/li\u003e \u003cli\u003eAllows linemen to adhere to safe-working distances and positioning needs, with fewer sticks\u003c\/li\u003e \u003cli\u003eReduces the number of clampsticks required on a line truck, saving limited storage space\u003c\/li\u003e \u003cli\u003eEngineered interface between sections ensure tool retracts with full control\u003c\/li\u003e \u003cli\u003eClose fit helps keep out dirt and moisture\u003c\/li\u003e \u003cli\u003eTop section is made with foam-center Epoxiglas™ insulated pole\u003c\/li\u003e \u003cli\u003eFunctions of this telescoping style are identical to fixed-length style\u003c\/li\u003e \u003cli\u003eAll controls can be easily accessed while wearing gloves\u003c\/li\u003e \u003cli\u003eEasy to disassemble, stick must be kept clean and dry inside to ensure long life\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eSales Drawing \u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e","brand":"Chance","offers":[{"title":"Includes Universal End \/ 8'10\"-14'4\"","offer_id":48989551165593,"sku":"ABC4033061","price":1103.47,"currency_code":"USD","in_stock":true},{"title":"Includes Universal End \/ 5'11\"-8'4\"","offer_id":48989551198361,"sku":"ABC4033060","price":786.79,"currency_code":"USD","in_stock":true},{"title":"No Universal Fitting \/ 5'7\"-8'","offer_id":48989551231129,"sku":"ABC4031035","price":750.06,"currency_code":"USD","in_stock":true},{"title":"No Universal Fitting \/ 8'7\"-14'","offer_id":48989551263897,"sku":"ABC4031036","price":1061.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/ab-chance-gripall-stick2-600x600.png?v=1788755914"},{"product_id":"chance-wireless-phasing-set","title":"CHANCE Wireless Phasing Set (WPS), 480V-765V","description":"\u003cp\u003eDual mode unit – Wireless Phasing Set (WPS) and Full-Range Auto-Ranging Voltage Indicator (ARVI)\u003c\/p\u003e \u003cul\u003e \u003cli\u003eWireless Main and Probe Units communicate via linked digital radios – 300 ft. range\u003c\/li\u003e \u003cli\u003eDetermine phase relationship between two conductors with same nominal voltage\u003c\/li\u003e \u003cli\u003eDisplays “In-Phase” or “Out-of-Phase” in WPS mode\u003c\/li\u003e \u003cli\u003eFor Overhead\/Underground use on 50\/60Hz systems\u003c\/li\u003e \u003c\/ul\u003e\u003cbr\u003e\u003ch3\u003eCHANCE Wireless Phasing Set (WPS), 480V-765V\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eWireless Main and Probe Units communicate via linked digital radios – 300 ft. range\u003c\/li\u003e \u003cli\u003eDetermine phase relationship between two conductors with same nominal voltage\u003c\/li\u003e \u003cli\u003eDisplays “In-Phase” or “Out-of-Phase” in WPS mode\u003c\/li\u003e \u003cli\u003eFor Overhead\/Underground use on 50\/60Hz systems\u003c\/li\u003e \u003cli\u003eAdjustable audible alarm\u003c\/li\u003e \u003cli\u003eMain has Full Range ARVI functionality\u003c\/li\u003e \u003cli\u003eShock tested per IEC 60068-2-27\u003c\/li\u003e \u003cli\u003eVibration tested per IEC 60068-2-6\u003c\/li\u003e \u003cli\u003eFor use with hot sticks only\u003c\/li\u003e \u003cli\u003eNot suitable for Hi-Pot Testing\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eSpec Sheet \u003c\/p\u003e \u003cp\u003eInstructions \u003c\/p\u003e","brand":"Chance","offers":[{"title":"Default Title","offer_id":48989551755417,"sku":"ABPSC4032916","price":5351.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/HPS_ID_PSC4032916_PRODIMAGE_1200.png?v=1788755919"},{"product_id":"chance-ground-clamp-ball-socket-i-5-1","title":"CHANCE Ground Clamp – Ball-Socket I-5 – 1″","description":"\u003cp\u003eGround Clamp for restricted-space applications and as a truck-grounding system, this compact design delivers a high-current rating usually associated with only large clamps. It applies to a wide range of switching equipment, including: Industrial metalclad gear, Substations — indoors and out, Distribution — overhead and underground. For trucks, a ball stud permanently mounts on each body. Two styles and two ball-stud lengths adapt to many applications. Bodies and eyescrews are a bronze alloy.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eBall-stud ground clamp for 1″ (25mm) ball-studs\u003c\/li\u003e \u003cli\u003eDrilled for 5\/8″-11 UNC threaded ferrule\u003c\/li\u003e \u003cli\u003eRated 43kA for 15 cycles and 30kA for 30 cycles\u003c\/li\u003e \u003c\/ul\u003e\u003cbr\u003e\u003ch3\u003eCHANCE Ground Clamp – Ball-Socket I-5 – 1″\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBall-stud ground clamp for 1″ (25mm) ball-studs\u003c\/li\u003e \u003cli\u003eDrilled for 5\/8″-11 UNC threaded ferrule\u003c\/li\u003e \u003cli\u003eRated 43kA for 15 cycles and 30kA for 30 cycles\u003c\/li\u003e \u003cli\u003eEye-screw for use with grip-all clamp-sticks\u003c\/li\u003e \u003c\/ul\u003e","brand":"Chance","offers":[{"title":"Default Title","offer_id":48989552050329,"sku":"ABC6002100","price":112.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/HPS_PPHID_249721_1200.webp?v=1788755921"},{"product_id":"chance-long-grounding-ball-stud","title":"CHANCE Grade 5 Long Grounding Ball Stud 1in. (25mm)","description":"\u003cp\u003eTin-plated grounding ball studs have nominal 1″ diameter ball and stud to fit NEMA terminal pads. Long Ball Stud has 3″ nominal shank length.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesigned and tested to ASTM F855 Grade 5 withstand rating of 43kA for 15 cycles or 30kA for 30 cycles\u003c\/li\u003e \u003cli\u003eFor use with 1in. (25mm) ball stud clamps\u003c\/li\u003e \u003cli\u003e3 in. nominal shank length\u003c\/li\u003e \u003c\/ul\u003e\u003cbr\u003e\u003ch3\u003eCHANCE Grade 5 Long Grounding Ball Stud 1in. (25mm)\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDesigned and tested to ASTM F855 Grade 5 withstand rating of 43kA for 15 cycles or 30kA for 30 cycles\u003c\/li\u003e \u003cli\u003eFor use with 1in. (25mm) ball stud clamps\u003c\/li\u003e \u003cli\u003e3 in. nominal shank length\u003c\/li\u003e \u003cli\u003e7 in. overall length\u003c\/li\u003e \u003cli\u003e2-3\/4 in. threaded shank with 1\/2 in.-13 UNC\u003c\/li\u003e \u003cli\u003eTin plated\u003c\/li\u003e \u003c\/ul\u003e","brand":"Chance","offers":[{"title":"Default Title","offer_id":48989552476313,"sku":"ABT6002364","price":71.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/Long-Ball-Stud.png?v=1788755924"},{"product_id":"chance-ground-ball-stud-short","title":"CHANCE Ground Ball Stud – Short – 1in. Ball – 4.25″ OAL","description":"\u003cp\u003eTin-plated ground ball studs have nominal 1″ diameter ball and stud to fit NEMA terminal pads.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eFor use with restricted-space applications such as a truck-grounding system, industrial metal clad clear, distribution systems, or underground switches\u003c\/li\u003e \u003cli\u003eMade from tin-plated bronze alloy with silicone bronze hardware\u003c\/li\u003e \u003cli\u003eASTM F855 Table 1 Withstand Ratings of 43kA for 15 cycles and 30kA for 30 cycles\u003c\/li\u003e \u003c\/ul\u003e\u003cbr\u003e\u003ch3\u003eCHANCE Ground Ball Stud – Short – 1in. Ball – 4.25″ OAL\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eFor use with restricted-space applications such as a truck-grounding system, industrial metal clad clear, distribution systems, or underground switches\u003c\/li\u003e \u003cli\u003eMade from tin-plated bronze alloy with silicone bronze hardware\u003c\/li\u003e \u003cli\u003eASTM F855 Table 1 Withstand Ratings of 43kA for 15 cycles and 30kA for 30 cycles\u003c\/li\u003e \u003c\/ul\u003e","brand":"Chance","offers":[{"title":"Default Title","offer_id":48989553098905,"sku":"ABC6002102","price":50.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/HPS_PPHID_249746_1200.webp?v=1788755926"},{"product_id":"chance-insulated-ratchet-cable-cutters","title":"CHANCE Insulated Ratchet Cable Cutters","description":"\u003cp\u003eHigh-performance design incorporates Delrin plastic rollers and a two-piece operating rod. Roller mechanism travels smoothly along main Epoxiglas® pole. Linked through the roller support unit, the hinged operating rod and larger Epoxiglas pole reinforce each other. These Ratchet Cable Cutters meet OSHA Electrical Rating subpart V-section 1926.951 (d). Insulated support pole is Chance orange 1 1\/2″-diameter Epoxiglas with Plastisol butt cap, operating shaft is 3\/8″-diameter solid fiberglass rod, and lever handle is 1″-diameter Epoxiglas with rubber cushion grip.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesigned for easier operation\u003c\/li\u003e \u003cli\u003eTested per OSHA \u0026amp; ASTM F711\u003c\/li\u003e \u003cli\u003eHigh-performance design incorporates Delrin rollers and two-piece operating rod\u003c\/li\u003e \u003cli\u003eRoller mechanism travels smoothly along main Epoxiglas® pole\u003c\/li\u003e \u003c\/ul\u003e\u003cbr\u003e\u003ch3\u003eCHANCE Insulated Ratchet Cable Cutters\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDesigned for easier operation\u003c\/li\u003e \u003cli\u003eTested per OSHA \u0026amp; ASTM F711\u003c\/li\u003e \u003cli\u003eHigh-performance design incorporates Delrin rollers and two-piece operating rod\u003c\/li\u003e \u003cli\u003eRoller mechanism travels smoothly along main Epoxiglas® pole\u003c\/li\u003e \u003cli\u003eLinked through the roller support unit, the hinged operating rod and larger Epoxiglas pole reinforce each other\u003c\/li\u003e \u003cli\u003eMeet OSHA Electrical Rating subpart V-section 1926.951 (d)\u003c\/li\u003e \u003cli\u003eInsulated support pole is Chance orange 1-1\/2”-diameter Epoxiglas with Plastisol butt cap\u003c\/li\u003e \u003cli\u003eOperating rod is 3\/8”-diameter solid fiberglass rod\u003c\/li\u003e \u003cli\u003eLever handle is 1”-diameter Epoxiglas with rubber cushion grip\u003c\/li\u003e \u003cli\u003eFour standard models offer practical 6-foot or 8-foot lengths with choice of cutter heads for soft wire or ACSR\u003c\/li\u003e \u003cli\u003eShear-type steel blades cut without deforming cable\u003c\/li\u003e \u003cli\u003eHeads are interchangeable for field changeouts\u003c\/li\u003e \u003cli\u003eSoft-Wire Head cuts aluminum cable through 1000 kcmil bare (1.152”) or jacketed URD (2.125”) and copper through 556 kcmil (1”)\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e","brand":"Chance","offers":[{"title":"6' \/ 1000 kcmil Al\/500 kcmil Cu","offer_id":48989553590425,"sku":"ABC4031381","price":1233.52,"currency_code":"USD","in_stock":true},{"title":"6' \/ 556 kcmil ACSR","offer_id":48989553623193,"sku":"ABC4031382","price":1117.38,"currency_code":"USD","in_stock":true},{"title":"8' \/ 1000 kcmil Al\/500 kcmil Cu","offer_id":48989553655961,"sku":"ABC4031383","price":1176.0,"currency_code":"USD","in_stock":true},{"title":"8' \/ 556 kcmil ACSR","offer_id":48989553688729,"sku":"ABC4031384","price":1173.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/HPS_ID_C4031381_PRODIMAGE_1200-600x600.jpg?v=1788755929"},{"product_id":"insulated-hydraulic-conductor-cutters","title":"CHANCE Insulated Hydraulic Conductor Cutters for up to 954 MCM ACSR","description":"\u003cp\u003eThe hydraulic conductor cutters are used to cut conductors up to 954 MCM ACSR, All-Aluminum, and 500 MCM copper. Operation is similar to that of a hydraulic jack- a knob-handle is turned to enable the lineman to operate the pump handle. When the cut is completed, the knob is turned in the opposite direction to allow the cutting head to open.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eOperates like a hydraulic jack- a knob-handle is turned to enable the lineman to operate the pump handle\u003c\/li\u003e \u003cli\u003eKnob is turned in the opposite direction to allow the cutting head to open\u003c\/li\u003e \u003cli\u003eEpoxiglas pole, handle, and hydraulic hose are tested to 100 kV per foot\u003c\/li\u003e \u003cli\u003eHydraulic oil has a dielectric strength of 25 + kV per ASTM D877-64\u003c\/li\u003e \u003c\/ul\u003e\u003cbr\u003e\u003ch3\u003eCHANCE Insulated Hydraulic Conductor Cutters for up to 954 MCM ACSR\u003c\/h3\u003e \u003cp\u003eThe Epoxiglas pole, handle and hydraulic hose have been tested to 100 kV per foot. Hydraulic oil has a dielectric strength of 25 + kV per ASTM D877-64. The hose has a minimum burst strength of 12,000 PSI. The pump provides a maximum pressure of 9,000 PSI. Features include jaws designed to cut without flattening the conductor. The jaws are also adjustable to compensate for wear. The hydraulic hose is located outside the pole for easy maintenance. It is extremely well balanced, requiring minimum effort to cut large conductors.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eOperates like a hydraulic jack- a knob-handle is turned to enable the lineman to operate the pump handle\u003c\/li\u003e \u003cli\u003eKnob is turned in the opposite direction to allow the cutting head to open\u003c\/li\u003e \u003cli\u003eEpoxiglas pole, handle, and hydraulic hose are tested to 100 kV per foot\u003c\/li\u003e \u003cli\u003eHydraulic oil has a dielectric strength of 25 + kV per ASTM D877-64\u003c\/li\u003e \u003cli\u003eHose minimum burst strength is 12,000 PSI\u003c\/li\u003e \u003cli\u003ePump provides maximum pressure of 9,000 PSI\u003c\/li\u003e \u003cli\u003eCuts without flattening conductor\u003c\/li\u003e \u003cli\u003eJaws are adjustable to compensate for wear\u003c\/li\u003e \u003cli\u003eHydraulic hose is located outside the pole for easy maintenance\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e","brand":"Chance","offers":[{"title":"6'","offer_id":48989554180249,"sku":"ABC4030731","price":3770.11,"currency_code":"USD","in_stock":true},{"title":"8'","offer_id":48989554213017,"sku":"ABC4030732","price":3766.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/HPS_ID_C4030731_PRODIMAGE_1200-2-600x600.jpg?v=1788755932"},{"product_id":"chance-flexible-insulated-wrench","title":"CHANCE Flexible Insulated Wrenches","description":"\u003cp\u003eThe insulated wrench has a standard square socket in lower end that accepts .5″ square-shank ratchet or similar hand tools. Square shank on upper end fits any .5″-drive socket. Mounted on 1 1\/2″-diameter Epoxiglas® extensions, these wrenches may be used for tightening nuts on hardware fittings on high-voltage lines. Coil spring around the universal joint limits flexibility so operator maintains control over the socket at various angles. Spring removes easily for lubrication.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eEpoxiglas ™ Pole is tested per ASTM F711 AND IEC 60855\u003c\/li\u003e \u003cli\u003eMade using heavy duty 1.5″ Diameter Epoxiglas Pole\u003c\/li\u003e \u003cli\u003e75 ft-lb torque rating\u003c\/li\u003e \u003c\/ul\u003e\u003cbr\u003e\u003ch3\u003eCHANCE Flexible Insulated Wrenches\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eEpoxiglas ™ Pole is tested per ASTM F711 AND IEC 60855\u003c\/li\u003e \u003cli\u003eMade using heavy duty 1.5″ Diameter Epoxiglas Pole\u003c\/li\u003e \u003cli\u003e75 ft-lb torque rating\u003c\/li\u003e \u003cli\u003eStandard square socket in lower end accepts ½” square-shank ratchet or similar hand tools\u003c\/li\u003e \u003cli\u003eSquare shank on upper end fits any ½”-drive socket\u003c\/li\u003e \u003cli\u003eUniversal joint coil spring limits flexibility, giving operator socket control at various angles\u003c\/li\u003e \u003cli\u003eSpring is easily removed for lubrication\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eSales Drawing \u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e","brand":"Chance","offers":[{"title":"6'3\"","offer_id":48989554442393,"sku":"ABC4032137","price":632.69,"currency_code":"USD","in_stock":true},{"title":"8'3\"","offer_id":48989554475161,"sku":"ABC4032136","price":658.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/HPS_PPHID_250090_1200-600x600.jpg?v=1788755934"},{"product_id":"chance-class-4-pole-cover","title":"CHANCE Class 4 Pole Covers","description":"\u003cp\u003eCHANCE® Class 4 Polyethylene Pole Cover. These pole guards are used to help protect personnel when raising or lowering a pole between energized lines or to cover poles when rubber glove maintenance is performed in relatively confined areas. The covers are made of high-dielectric linear polyethylene material that will not flash flame. This material will have some softening without deformation at approximately 170˚F, and it will resist brittleness at temperatures to -50˚F.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesign tested to ASTM F712 Class 4\u003c\/li\u003e \u003cli\u003eProtects workers from accidental brush contact with energized components during line maintenance\u003c\/li\u003e \u003cli\u003eMade from bright orange polyethylene\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e\u003cbr\u003e\u003ch3\u003eCHANCE Class 4 Pole Covers\u003c\/h3\u003e \u003cp\u003eAll Chance pole covers are ribbed to reduce cover contact with the pole, thus minimizing creosote contamination. The rope handles permit personnel to easily spread the covers and snap them around the pole; rubber gloves must be worn during this procedure. Prolonged contact with an energized conductor must not be allowed.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesign tested to ASTM F712 Class 4\u003c\/li\u003e \u003cli\u003eProtects workers from accidental brush contact with energized components during line maintenance\u003c\/li\u003e \u003cli\u003eMade from bright orange polyethylene\u003c\/li\u003e \u003cli\u003eMaximum use voltage of 36.6kV covered-phase-to-covered-phase\u003c\/li\u003e \u003cli\u003eRope handles to easily spread covers and snap them around the pole (Rubber gloves must be used during installation)\u003c\/li\u003e \u003cli\u003eNylon button to join pole covers for extended lengths\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e","brand":"Chance","offers":[{"title":"9\" x 72\"","offer_id":48989554737305,"sku":"ABM49376","price":403.95,"currency_code":"USD","in_stock":true},{"title":"12\" x 48\"","offer_id":48989554770073,"sku":"ABC4060030","price":395.36,"currency_code":"USD","in_stock":true},{"title":"12\" x 72\"","offer_id":48989554802841,"sku":"ABC4060000","price":424.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/pole-guard-600x623-2.jpg?v=1788755936"},{"product_id":"chance-class-4-insulator-cover","title":"CHANCE Class 4 Insulator Cover, Grip-All Adapter","description":"\u003cp\u003eThese covers provide a highly versatile system of covering up a wide variety of configurations on distribution systems. The conductor covers couple with the insulator covers and dead-end units to cover pin-type or post-type insulator construction. Together, they virtually surround the hot parts and hardware to give lineworkers extra protection when rubber gloving or using hot sticks. Each item is fitted with an adapter for multiposition handling by Grip-All clampsticks. These covers also couple with Chance 25 kV covers, Classes 2, 3, and 4 of rubber line hose, and major brands of rubber insulator hoods.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesigned and tested to ASTM F712 Class 4\u003c\/li\u003e \u003cli\u003eProtects workers from accidental brush contact with energized components during line maintenance\u003c\/li\u003e \u003cli\u003eMade from bright orange polyethylene\u003c\/li\u003e \u003cli\u003eMaximum use voltage of 36.6kV covered-phase-to-covered-phase\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e*Testing is available for an additional charge\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e\u003cbr\u003e\u003ch3\u003eCHANCE Class 4 Insulator Cover, Grip-All Adapter\u003c\/h3\u003e \u003cp\u003eAll covers are bright orange in color. All are made of high-density polyethylene in a uniform wall thickness for excellent dielectric\/puncture strength and perform well from -50˚ to 170˚F. Ultra-violet stabilizers in the material help inhibit degradation as a result of atmospheric exposure. Deadend cover fits three 10″-diameter porcelain bells or polymer dead-end insulators and couples with the line cover. To meet the Class 4 rating, the dead-end cover must be used in conjunction with a rubber insulating blanket covering the coupler to the line cover. Failure to use a blanket to cover the coupler may result in electrical shock, severe injury, or death by electrocution.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesigned and tested to ASTM F712 Class 4\u003c\/li\u003e \u003cli\u003eProtects workers from accidental brush contact with energized components during line maintenance\u003c\/li\u003e \u003cli\u003eMade from bright orange polyethylene\u003c\/li\u003e \u003cli\u003eMaximum use voltage of 36.6kV covered-phase-to-covered-phase\u003c\/li\u003e \u003cli\u003eIncludes a grip-all adapter for installation with a grip-all clampstick\u003c\/li\u003e \u003cli\u003eFits 6-1\/2in. to 9in. diameter pin or post insulators\u003c\/li\u003e \u003cli\u003e100% electrically tested, visually inspected and date stamped\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e","brand":"Chance","offers":[{"title":"12\"","offer_id":48989555097753,"sku":"ABC4060557","price":255.14,"currency_code":"USD","in_stock":true},{"title":"16.5\"","offer_id":48989555130521,"sku":"ABC4060557L","price":255.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/HPS_ID_C4060557_PRODIMAGE_515.webp?v=1788755939"},{"product_id":"chance-class-4-deadend-cover","title":"CHANCE Class 4 Deadend Cover","description":"\u003cp\u003eThese covers provide a highly versatile system of covering up a wide variety of configurations on distribution systems. The conductor covers couple with the insulator covers and dead-end units to cover pin-type or post-type insulator construction. Together, they virtually surround the hot parts and hardware to give lineworkers extra protection when rubber gloving or using hot sticks. Each item is fitted with an adapter for multiposition handling by Grip-All clampsticks. These covers also couple with Chance 25 kV covers, Classes 2, 3, and 4 of rubber line hose, and major brands of rubber insulator hoods.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesigned and tested to ASTM F712 Class 4\u003c\/li\u003e \u003cli\u003eProtects workers from accidental brush contact with energized components during line maintenance\u003c\/li\u003e \u003cli\u003eTo meet Class 4 rating, the deadend cover must be used in conjunction with a rubber insulating blanket covering the coupling of the deadend cover with the line cover\u003c\/li\u003e \u003cli\u003eMade from bright orange polyethylene\u003c\/li\u003e \u003cli\u003eMaximum use voltage of 36.6kV\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e*Testing available for an additional charge\u003c\/p\u003e\u003cbr\u003e\u003ch3\u003eCHANCE Class 4 Deadend Cover\u003c\/h3\u003e \u003cp\u003eAll covers are bright orange in color. All are made of high-density polyethylene in a uniform wall thickness for excellent dielectric\/puncture strength and perform well from -50˚ to 170˚F. Ultra-violet stabilizers in the material help inhibit degradation as a result of atmospheric exposure. Deadend cover fits three 10″-diameter porcelain bells or polymer dead-end insulators and couples with the line cover. To meet the Class 4 rating, the dead-end cover must be used in conjunction with a rubber insulating blanket covering the coupler to the line cover. Failure to use a blanket to cover the coupler may result in electrical shock, severe injury, or death by electrocution.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesigned and tested to ASTM F712 Class 4\u003c\/li\u003e \u003cli\u003eProtects workers from accidental brush contact with energized components during line maintenance\u003c\/li\u003e \u003cli\u003eTo meet Class 4 rating, the deadend cover must be used in conjunction with a rubber insulating blanket covering the coupling of the deadend cover with the line cover\u003c\/li\u003e \u003cli\u003eMade from bright orange polyethylene\u003c\/li\u003e \u003cli\u003eMaximum use voltage of 36.6kV\u003c\/li\u003e \u003cli\u003e100% electrically tested, visually inspected and date stamped\u003c\/li\u003e \u003cli\u003eIncludes a grip-all adapter for installation with a grip-all clampstick\u003c\/li\u003e \u003cli\u003eFits over a maximum of three 10in. diameter deadend insulators\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eSales Drawing \u003c\/p\u003e","brand":"Chance","offers":[{"title":"Default Title","offer_id":48989555392665,"sku":"ABC4060537","price":402.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/HPS_ID_C4060537_PRODIMAGE_515.webp?v=1788755941"},{"product_id":"chance-36-6kv-conductor-covers","title":"CHANCE Class 4 Conductor Covers with Grip-All Adapter","description":"\u003cp\u003eThese covers provide a highly versatile system of covering up a wide variety of configurations on distribution systems. The conductor covers couple with the insulator covers and dead-end units to cover pin-type or post-type insulator construction. Together, they virtually surround the hot parts and hardware to give lineworkers extra protection when rubber gloving or using hot sticks. Each item is fitted with an adapter for multiposition handling by Grip-All clampsticks. These covers also couple with Chance 25 kV covers, Classes 2, 3, and 4 of rubber line hose, and major brands of rubber insulator hoods.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesigned and tested to ASTM F712 Class 4\u003c\/li\u003e \u003cli\u003eProtects workers from accidental brush contact with energized components during line maintenance\u003c\/li\u003e \u003cli\u003eMade from bright orange polyethylene\u003c\/li\u003e \u003cli\u003eMaximum use voltage of 36.6kV covered-phase-to-covered-phase\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e*Testing available for an additional charge\u003c\/p\u003e\u003cbr\u003e\u003ch3\u003eCHANCE Class 4 Conductor Covers with Grip-All Adapter\u003c\/h3\u003e \u003cp\u003eAll covers are bright orange in color. All are made of high-density polyethylene in a uniform wall thickness for excellent dielectric\/puncture strength and perform well from -50˚ to 170˚F. Ultra-violet stabilizers in the material help inhibit degradation as a result of atmospheric exposure. Deadend cover fits three 10″-diameter porcelain bells or polymer dead-end insulators and couples with the line cover. To meet the Class 4 rating, the dead-end cover must be used in conjunction with a rubber insulating blanket covering the coupler to the line cover. Failure to use a blanket to cover the coupler may result in electrical shock, severe injury, or death by electrocution.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesigned and tested to ASTM F712 Class 4\u003c\/li\u003e \u003cli\u003eProtects workers from accidental brush contact with energized components during line maintenance\u003c\/li\u003e \u003cli\u003eMade from bright orange polyethylene\u003c\/li\u003e \u003cli\u003eMaximum use voltage of 36.6kV covered-phase-to-covered-phase\u003c\/li\u003e \u003cli\u003eIncludes a grip-all adapter for installation with a grip-all clampstick\u003c\/li\u003e \u003cli\u003e100% electrically tested, visually inspected and date stamped\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eC4060557 Spec Sheet \u003c\/p\u003e","brand":"Chance","offers":[{"title":"Default Title","offer_id":48989555654809,"sku":"ABC4060514GA","price":217.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/conductor-cover.jpg?v=1788755944"},{"product_id":"chance-15-36-6kv-spiral-conductor-covers-for-double-crossarms","title":"CHANCE 15\/36.6KV Spiral Conductor Covers for Double Crossarms","description":"\u003cp\u003eCHANCE® Spiral Conductor Cover, 14.6\/36.6kV provides for ease of installation from a bucket or platform, in single units or linked together. The bright-orange conductor cover is easy to install. It provides extra protection with a wide air space between two thicknesses of solid insulation. The cover is made of tough, durable ABS plastic. 7″ in diameter and 53″ in length. All units can interlock with each other to make up a chain of guards.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eOptions include a Grip-All Adapter, 4ft, or 6ft Epoxiglas handle.\u003c\/li\u003e \u003cli\u003eProtects workers from accidental brush contact with energized components during line maintenance\u003c\/li\u003e \u003cli\u003eUnits interlock to form a long chain\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e*Testing available for an additional charge\u003c\/p\u003e\u003cbr\u003e\u003ch3\u003eCHANCE 15\/36.6KV Spiral Conductor Covers for Double Crossarms\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eOptions include a Grip-All Adapter, 4ft, or 6ft Epoxiglas handle.\u003c\/li\u003e \u003cli\u003eProtects workers from accidental brush contact with energized components during line maintenance\u003c\/li\u003e \u003cli\u003eUnits interlock to form a long chain\u003c\/li\u003e \u003cli\u003eMade from bright orange ABS plastic\u003c\/li\u003e \u003cli\u003eMaximum use voltage of 14.6\/36.6kV covered-phase-to-covered-phase\u003c\/li\u003e \u003cli\u003eWorks with double crossarm construction for 15kV construction (fits over two 15kV pin type insulators)\u003c\/li\u003e \u003cli\u003eEliminates need for an insulator cover\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eGrip-All Adapter version Spec Sheet \u003c\/p\u003e \u003cp\u003e6ft Epoxiglas version Spec Sheet \u003c\/p\u003e \u003cp\u003ef4ft Epoxiglas version Spec Sheet \u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e","brand":"Chance","offers":[{"title":"Conductor Cover w\/Grip-All Adapter","offer_id":48989555949721,"sku":"ABC4060084GA","price":517.93,"currency_code":"USD","in_stock":true},{"title":"Conductor Cover w\/4ft Epoxiglas Handle","offer_id":48989555982489,"sku":"ABC4060084","price":638.27,"currency_code":"USD","in_stock":true},{"title":"Conductor Cover w\/6ft Epoxiglas Handle","offer_id":48989556015257,"sku":"ABC40600846","price":789.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/ab-chance-spiral-conductor-cover-600x600.png?v=1788755946"},{"product_id":"chance-46kv-spiral-conductor-cover","title":"CHANCE 46KV Spiral Conductor Cover","description":"\u003cp\u003eCHANCE® Class 5 Spiral Conductor Cover provides for ease of installation from a bucket or platform, in single units or linked together. The bright-orange conductor cover is easy to install. It provides extra protection with a wide air space between two thicknesses of solid insulation. The cover is made of tough, durable ABS plastic. Overall length of each cover is 53 inches. All units can interlock with each other to make up a chain of guards.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesign tested to ASTM F712 Class 5\u003c\/li\u003e \u003cli\u003eProtects workers from accidental brush contact with energized components during line maintenance\u003c\/li\u003e \u003cli\u003eUnits interlock to form a long chain\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e*Testing available for an additional charge\u003c\/p\u003e\u003cbr\u003e\u003ch3\u003eCHANCE 46KV Spiral Conductor Cover\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDesign tested to ASTM F712 Class 5\u003c\/li\u003e \u003cli\u003eProtects workers from accidental brush contact with energized components during line maintenance\u003c\/li\u003e \u003cli\u003eUnits interlock to form a long chain\u003c\/li\u003e \u003cli\u003eMade from bright orange ABS plastic\u003c\/li\u003e \u003cli\u003eMaximum use voltage of 48.3kV covered-phase-to-covered-phase\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e","brand":"Chance","offers":[{"title":"Conductor Cover w\/Grip-All Adapter","offer_id":48989556244633,"sku":"ABC4060082GA","price":553.16,"currency_code":"USD","in_stock":true},{"title":"Conductor Cover w\/4ft Epoxiglas Handle","offer_id":48989556277401,"sku":"ABC4060082","price":695.34,"currency_code":"USD","in_stock":true},{"title":"Conductor Cover w\/6ft Epoxiglas Handle","offer_id":48989556310169,"sku":"ABC40600826","price":774.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/HPS_ID_C4060083GA_ALT1_PRODIMAGE_515-1.jpg?v=1788755949"},{"product_id":"chance-15-36-6kv-spiral-conductor-covers","title":"CHANCE 14.6\/36.6KV Spiral Conductor Covers","description":"\u003cp\u003eCHANCE® Spiral Conductor Cover, 14.6\/36.6kV provides for ease of installation from a bucket or platform, in single units or linked together. The bright-orange conductor cover is easy to install. It provides extra protection with a wide air space between two thicknesses of solid insulation. The cover is made of tough, durable ABS plastic. 7″ in diameter and 53″ in length. All units can interlock with each other to make up a chain of guards.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eProtects workers from accidental brush contact with energized components during line maintenance\u003c\/li\u003e \u003cli\u003eUnits interlock to form a long chain\u003c\/li\u003e \u003cli\u003eMade from bright orange ABS plastic\u003c\/li\u003e \u003cli\u003eMaximum use voltage of 14.6\/36.6kV covered-phase-to-covered-phase\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e*Testing available for an additional charge\u003c\/p\u003e\u003cbr\u003e\u003ch3\u003eCHANCE 14.6\/36.6KV Spiral Conductor Covers\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eProtects workers from accidental brush contact with energized components during line maintenance\u003c\/li\u003e \u003cli\u003eUnits interlock to form a long chain\u003c\/li\u003e \u003cli\u003eMade from bright orange ABS plastic\u003c\/li\u003e \u003cli\u003eMaximum use voltage of 14.6\/36.6kV covered-phase-to-covered-phase\u003c\/li\u003e \u003cli\u003eWorks with single crossarm construction for 15kV construction (fits over most 15kV insulators)\u003c\/li\u003e \u003cli\u003eEliminates need for an insulator cover\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eGrip All Spec Sheet \u003c\/p\u003e \u003cp\u003e4ft Spec Sheet \u003c\/p\u003e \u003cp\u003e6ft Spec Sheet \u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e","brand":"Chance","offers":[{"title":"Conductor Cover w\/Grip-All Adapter","offer_id":48989556637849,"sku":"ABC4060083GA","price":602.89,"currency_code":"USD","in_stock":true},{"title":"Conductor Cover w\/4ft Epoxiglas Handle","offer_id":48989556670617,"sku":"ABC4060083","price":656.85,"currency_code":"USD","in_stock":true},{"title":"Conductor Cover w\/6ft Epoxiglas Handle","offer_id":48989556703385,"sku":"ABC40600836","price":773.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/HPS_ID_C4060083GA_ALT1_PRODIMAGE_515-1_54f59241-68a9-4ef4-b03e-ccc1e30c48da.jpg?v=1788755951"},{"product_id":"chance-class-3-insulator-cover","title":"CHANCE Class 3 Insulator Cover with Grip-all Adapter","description":"\u003cp\u003eCHANCE® Class 3 Insulator Cover with Grip-all Adapter. For all types of high-voltage line maintenance. Most pieces can be installed with rubber gloves or hot stick application eyes. These covers provide a highly versatile system of covering up a wide variety of configurations on distribution systems. The conductor covers mate with insulator covers to cover pin-type or post-type insulator construction and also can be used with the deadend cover\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesigned and tested to ASTM F712 Class 3\u003c\/li\u003e \u003cli\u003eProtects workers from accidental brush contact with energized components during line maintenance\u003c\/li\u003e \u003cli\u003eMade from bright orange polyethylene\u003c\/li\u003e \u003cli\u003eMaximum use voltage of 26.4kV covered-phase-to-covered-phase\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e*Testing available for an additional charge\u003c\/p\u003e\u003cbr\u003e\u003ch3\u003eCHANCE Class 3 Insulator Cover with Grip-all Adapter\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDesigned and tested to ASTM F712 Class 3\u003c\/li\u003e \u003cli\u003eProtects workers from accidental brush contact with energized components during line maintenance\u003c\/li\u003e \u003cli\u003eMade from bright orange polyethylene\u003c\/li\u003e \u003cli\u003eMaximum use voltage of 26.4kV covered-phase-to-covered-phase\u003c\/li\u003e \u003cli\u003eIncludes a grip-all adapter for installation with a grip-all clampstick\u003c\/li\u003e \u003cli\u003eDimensions of 21in. long, 8.5in. wide\u003c\/li\u003e \u003cli\u003e100% electrically tested, visually inspected and date stamped\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eCatalog \u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e","brand":"Chance","offers":[{"title":"6\"","offer_id":48989556965529,"sku":"ABC4060182","price":146.78,"currency_code":"USD","in_stock":true},{"title":"9\"","offer_id":48989556998297,"sku":"ABC4060182L","price":149.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/HPS_ID_C4060182_PRODIMAGE_515.webp?v=1788755954"},{"product_id":"chance-class-3-5-ft-conductor-cover-2","title":"CHANCE Class 3, 5 FT Conductor Cover","description":"\u003cp\u003eCHANCE® Class 3, 5 ft. Conductor Cover. For all types of high-voltage line maintenance. Most pieces can be installed with rubber gloves or hot stick application eyes. These covers provide a highly versatile system of covering up a wide variety of configurations on distribution systems. The conductor covers mate with insulator covers to cover pin-type or post-type insulator construction and also can be used with the deadend cover.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesigned and tested to ASTM F712 Class 3\u003c\/li\u003e \u003cli\u003eProtects workers from accidental brush contact with energized components during line maintenance\u003c\/li\u003e \u003cli\u003eMade from bright orange polyethylene\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e*Testing available for an additional charge\u003c\/p\u003e\u003cbr\u003e\u003ch3\u003eCHANCE Class 3, 5 FT Conductor Cover\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDesigned and tested to ASTM F712 Class 3\u003c\/li\u003e \u003cli\u003eProtects workers from accidental brush contact with energized components during line maintenance\u003c\/li\u003e \u003cli\u003eMade from bright orange polyethylene\u003c\/li\u003e \u003cli\u003eMaximum use voltage of 26.4kV covered-phase-to-covered-phase\u003c\/li\u003e \u003cli\u003e100% electrically tested, visually inspected and date stamped\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eCatalog \u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e","brand":"Chance","offers":[{"title":"Conductor Cover w\/Grip-All Adapter","offer_id":48989557260441,"sku":"ABC4060181GA","price":195.14,"currency_code":"USD","in_stock":true},{"title":"Conductor Cover w\/4ft Epoxiglas Handle","offer_id":48989557293209,"sku":"ABC4060181","price":331.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/c4060181ga.jpg?v=1788755956"},{"product_id":"chance-class-3-deadend-cover","title":"CHANCE Class 3 Deadend Cover","description":"\u003cp\u003eCHANCE® Class 3 Deadend Cover for a Maximum of Two 10in. Diameter deadend insulators. For all types of high-voltage line maintenance. Most pieces can be installed with rubber gloves or hot stick application eyes. These covers provide a highly versatile system of covering up a wide variety of configurations on distribution systems. The conductor covers mate with insulator covers to cover pin-type or post-type insulator construction and also can be used with the deadend cover\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesigned and tested to ASTM F712 Class 3\u003c\/li\u003e \u003cli\u003eProtects workers from accidental brush contact with energized components during line maintenance\u003c\/li\u003e \u003cli\u003eDimensions of 34in. long, 11in. wide, and 12-1\/2″ from conductor to unit bottom\u003c\/li\u003e \u003cli\u003eMade from bright orange polyethylene\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e*Testing available for an additional charge\u003c\/p\u003e\u003cbr\u003e\u003ch3\u003eCHANCE Class 3 Deadend Cover\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDesigned and tested to ASTM F712 Class 3\u003c\/li\u003e \u003cli\u003eProtects workers from accidental brush contact with energized components during line maintenance\u003c\/li\u003e \u003cli\u003eDimensions of 34in. long, 11in. wide, and 12-1\/2″ from conductor to unit bottom\u003c\/li\u003e \u003cli\u003eMade from bright orange polyethylene\u003c\/li\u003e \u003cli\u003eMaximum use voltage of 26.4kV\u003c\/li\u003e \u003cli\u003e100% electrically tested, visually inspected and date stamped\u003c\/li\u003e \u003cli\u003eIncludes a grip-all adapter for installation with a grip-all clampstick and hotstick blanket pin\u003c\/li\u003e \u003cli\u003eFits over a maximum of two 10in. diameter deadend insulators\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eCatalog \u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e","brand":"Chance","offers":[{"title":"Default Title","offer_id":48989557751961,"sku":"ABC4060164","price":359.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/HPS_PPHID_249684_515.webp?v=1788755958"},{"product_id":"chance-class-3-cutout-cover","title":"CHANCE Class 3 Cutout Cover with Locking Pin","description":"\u003cp\u003eCHANCE® Class 3 Cutout Cover with Locking Pin. For all types of high-voltage line maintenance. Most pieces can be installed with rubber gloves or hot stick application eyes. These covers provide a highly versatile system of covering up a wide variety of configurations on distribution systems. The conductor covers mate with insulator covers to cover pin-type or post-type insulator construction and also can be used with the deadend cover.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eAids in protection of line workers working near most open-type cutouts rated at 25kV or under\u003c\/li\u003e \u003cli\u003eWill not fit over cutouts with linkbreak levers or similar devices\u003c\/li\u003e \u003cli\u003eMade from bright orange polyethylene\u003c\/li\u003e \u003cli\u003eMaximum use voltage of 26.4kV covered-phase-to-covered-phase\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e*Testing available for an additional charge\u003c\/p\u003e\u003cbr\u003e\u003ch3\u003eCHANCE Class 3 Cutout Cover with Locking Pin\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDesign tested to ASTM F712 Class 3\u003c\/li\u003e \u003cli\u003eAids in protection of line workers working near most open-type cutouts rated at 25kV or under\u003c\/li\u003e \u003cli\u003eWill not fit over cutouts with linkbreak levers or similar devices\u003c\/li\u003e \u003cli\u003eMade from bright orange polyethylene\u003c\/li\u003e \u003cli\u003eMaximum use voltage of 26.4kV covered-phase-to-covered-phase\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eCatalog \u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e","brand":"Chance","offers":[{"title":"Default Title","offer_id":48989558014105,"sku":"ABC4060009","price":399.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/HPS_ID_C4060009_PRODIMAGE_515.webp?v=1788755960"},{"product_id":"chance-wrench-extension-7","title":"CHANCE Wrench Extension, 7 FT","description":"\u003cp\u003eExtension assemblies can be added where soil conditions dictate that anchors be set more than one rod-length deep. For standard and hybrid drive-end wrenches.\u003c\/p\u003e \u003cp\u003eContact us if you have any questions.\u003c\/p\u003e\u003cbr\u003e\u003ch3\u003eDrive End Wrench Extension, 7 FT\u003c\/h3\u003e \u003cp\u003eRated 10,000 ft-lbs. Extension assemblies can be added where soil conditions dictate that anchors be set more than one rod-length deep.\u003c\/p\u003e \u003cp\u003eInstructions\u003c\/p\u003e","brand":"Chance","offers":[{"title":"Default Title","offer_id":48989558309017,"sku":"AB630028","price":2470.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/PPHID-19491_1200-1.jpg?v=1788755964"},{"product_id":"chance-wrench-extension-312","title":"CHANCE Wrench Extension, 3-1\/2 FT","description":"\u003cp\u003eExtension assemblies can be added where soil conditions dictate that anchors be set more than one rod-length deep. For standard and hybrid drive-end wrenches.\u003c\/p\u003e \u003cp\u003eContact us if you have any questions.\u003c\/p\u003e\u003cbr\u003e\u003ch3\u003eDrive End Wrench Extension, 3-1\/2 FT\u003c\/h3\u003e \u003cp\u003eRated 10,000 ft-lbs. Extension assemblies can be added where soil conditions dictate that anchors be set more than one rod-length deep.\u003c\/p\u003e \u003cp\u003eInstructions\u003c\/p\u003e","brand":"Chance","offers":[{"title":"Default Title","offer_id":48989558571161,"sku":"AB630027","price":1727.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/PPHID-19491_1200-1_25bca306-05b0-4741-a7e9-dc1adb4f1595.jpg?v=1788755965"},{"product_id":"chance-7-drive-end-wrench-112","title":"CHANCE 7′ Drive End Wrench, 1-1\/2″ (Yellow Band)","description":"\u003cp class=\"rich-text-wrapper mb-4\"\u003e1.5″ X 7′ Drive End Wrench. Yellow Band.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eThe Anchor Drive End Wrench transmits the torque from the Kelly bar of the digger to the hub of the Power-Installed Screw Anchor\u003c\/li\u003e \u003cli\u003eA complete tool system consists of: kelly bar adapter, torque indicator, locking dog assembly and drive end wrench.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e\u003cbr\u003e\u003ch3\u003e7′ Drive End Wrench\u003c\/h3\u003e \u003cp\u003eStandard duty for 1-1\/2″ anchors\u003c\/p\u003e \u003cp\u003eA complete tool system consists of: kelly bar adapter, torque indicator, locking dog assembly, and wrench.\u003c\/p\u003e \u003cp\u003e1 1\/2″ x 7′ Spec Sheet \u003c\/p\u003e","brand":"Chance","offers":[{"title":"Default Title","offer_id":48989558866073,"sku":"ABC3031064","price":1044.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/HPS_ID_C3031064_PRODIMAGE_515.png?v=1788755968"},{"product_id":"chance-7-drive-end-wrench-138","title":"CHANCE 7′ Drive End Wrench,1-3\/8″ (Orange Band)","description":"\u003cp class=\"rich-text-wrapper mb-4\"\u003e1 3\/8″ X 7′ Drive End Wrench.\u003c\/p\u003e \u003cp class=\"rich-text-wrapper mb-4\" data-v-29e8df57=\"\"\u003eEnsure your crews are ready to properly and safely install anchors by selecting CHANCE anchors and installation tooling.\u003c\/p\u003e \u003cdiv class=\"rich-text-wrapper mb-4\" data-v-29e8df57=\"\"\u003e \u003cul\u003e \u003cli\u003eThe Anchor Drive End Wrench transmits the torque from the Kelly bar of the digger to the hub of the Power-Installed Screw Anchor\u003c\/li\u003e \u003cli\u003eA complete tool system consists of: kelly bar adapter, torque indicator, locking dog assembly and drive end wrench.\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e\u003cbr\u003e\u003ch3\u003e7′ Drive End Wrench\u003c\/h3\u003e \u003cp\u003eStandard duty 1-3\/8″ X 7′ Wrench\u003c\/p\u003e \u003cp\u003eA complete tool system consists of: kelly bar adapter, torque indicator, locking dog assembly, and wrench.\u003c\/p\u003e \u003cp\u003e1 3\/8″ x 7′ Spec Sheet\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e","brand":"Chance","offers":[{"title":"Default Title","offer_id":48989559128217,"sku":"ABC1021583","price":767.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/PPHID-19489_1200-1-1.jpg?v=1788755971"},{"product_id":"tough-one-drive-end-extension-7","title":"CHANCE Tough One Drive End Extension, 7 FT","description":"\u003cp\u003eTOUGH ONE 15k Drive End Extensions\u003c\/p\u003e \u003cp\u003eExtension assemblies can be added where soil conditions dictate that anchors be set more than one rod length deep. Rated 15,000 ft-lbs.\u003c\/p\u003e \u003cp\u003eContact us if you have any questions.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e\u003cbr\u003e\u003ch3\u003eTough One Drive End Extension, 7 FT\u003c\/h3\u003e \u003cp\u003eApplication\/Installation \u003c\/p\u003e \u003cp\u003e7′ Spec Sheet \u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e","brand":"Chance","offers":[{"title":"Default Title","offer_id":48989559390361,"sku":"ABC3030988","price":3479.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/pphid-19491_1200.jpg?v=1788755973"},{"product_id":"tough-one-drive-end-extension","title":"CHANCE Tough One Drive End Extension, 3 1\/2 FT","description":"\u003cp\u003eTOUGH ONE Drive End Extension, 15K\u003c\/p\u003e \u003cp\u003eExtension assemblies can be added where soil conditions dictate that anchors be set more than one rod length deep. Rated 15,000 ft-lbs.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e\u003cbr\u003e\u003ch3\u003eTough One Drive End Extension\u003c\/h3\u003e \u003cp\u003eApplication\/Installation \u003c\/p\u003e \u003cp\u003e3.5′ Spec Sheet \u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e","brand":"Chance","offers":[{"title":"Default Title","offer_id":48989559652505,"sku":"ABC3030987","price":3106.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/pphid-19491_1200_4b6795b3-e13c-4690-8255-ee3df3db42b5.jpg?v=1788755976"},{"product_id":"chance-railing-for-8-ft-platform","title":"CHANCE Railing for 8 FT Platform","description":"\u003cdiv class=\"hu-js-collapse-content\"\u003e \u003cp\u003eChance Railing for 8′ Platform. Epoxiglas (Fiberglass) construction adds belt-on capability and restraining guide for lineworkers.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eIMPORTANT: Rails and Tripods are not suited for use as a fall restraint device\u003c\/li\u003e \u003cli\u003eInsulating members manufactured to same standards as Chance Hotsticks: OSHA subpart V, section 1926.951(d), IEC 60855, and ASTM 711\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e \u003c\/div\u003e\u003cbr\u003e\u003ch3\u003eCHANCE Railing for 8 FT Platform\u003c\/h3\u003e \u003cdiv class=\"prod-overview hu-collapse in\"\u003e \u003cdiv class=\"product-features\"\u003e \u003cul\u003e \u003cli\u003eIMPORTANT: Rails and Tripods are not suited for use as a fall restraint device\u003c\/li\u003e \u003cli\u003eInsulating members manufactured to same standards as Chance Hotsticks: OSHA subpart V, section 1926.951(d), IEC 60855, and ASTM 711\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"addtocart-component\"\u003e\u003c\/div\u003e \u003cp\u003e \u003c\/p\u003e","brand":"Chance","offers":[{"title":"Default Title","offer_id":48989559947417,"sku":"ABC4020024","price":1268.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/ab-chance-platform-railing.png?v=1788755978"},{"product_id":"chance-railing-for-6-ft-platform","title":"CHANCE Railing for 6 FT Platform","description":"\u003cdiv class=\"hu-js-collapse-content\"\u003e \u003cp\u003eChance Railing for 6′ Platform. Epoxiglas (Fiberglass) construction adds belt-on capability and restraining guide for lineworkers.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eIMPORTANT: Rails and Tripods are not suited for use as a fall restraint device\u003c\/li\u003e \u003cli\u003eInsulating members manufactured to same standards as Chance Hotsticks: OSHA subpart V, section 1926.951(d), IEC 60855, and ASTM 711\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e","brand":"Chance","offers":[{"title":"Default Title","offer_id":48989560406169,"sku":"ABC4020023","price":1145.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/ab-chance-platform-railing_252ca57f-f8b2-4068-afa3-cb7692621400.png?v=1788755981"},{"product_id":"ab-chance-regular-duty-swivel-hook-ladders","title":"AB CHANCE REGULAR DUTY SWIVEL HOOK LADDERS","description":"\u003cp\u003eEpoxiglas Hook Ladders have many applications in high voltage maintenance to position linemen in the most advantageous working location, making line repairs possible at otherwise almost inaccessible places. All hooks are formed from 1″-diameter tempered steel and can be swiveled to best fit various angles on the structure. Steel chains clip to the hooks to assist in securing the ladder to a support. Rung material is 1.25″ Epoxiglas, sand coated.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMeets ASTM F711 and IEC 61478 – Category 2\u003c\/li\u003e \u003cli\u003eDesigned to effectively position linemen for high-voltage maintenance\u003c\/li\u003e \u003cli\u003eMake line repairs possible, even in inaccessible places\u003c\/li\u003e \u003cli\u003eRegular Duty Ladders with 2″ siderails for vertical suspension applications\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e\u003cbr\u003e\u003ch4\u003eAB CHANCE REGULAR DUTY SWIVEL HOOK LADDERS\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eMeets ASTM F711 and IEC 61478 – Category 2\u003c\/li\u003e \u003cli\u003eDesigned to effectively position linemen for high-voltage maintenance\u003c\/li\u003e \u003cli\u003eMake line repairs possible, even in inaccessible places\u003c\/li\u003e \u003cli\u003eRegular Duty Ladders with 2″ siderails for vertical suspension applications\u003c\/li\u003e \u003cli\u003eHooks are formed from 1″-diameter tempered steel\u003c\/li\u003e \u003cli\u003eThese hooks can be swiveled to best fit various angles on structure\u003c\/li\u003e \u003cli\u003eLadders include 8″-dia. hooks\u003c\/li\u003e \u003cli\u003eSteel chains clip to hooks to assist in securing ladder to support\u003c\/li\u003e \u003cli\u003eRung material 1-1\/4″ sand-coated Epoxiglas\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eSales Drawings \u003c\/p\u003e","brand":"Chance","offers":[{"title":"8'","offer_id":48989560668313,"sku":"ABH49048","price":3081.51,"currency_code":"USD","in_stock":true},{"title":"10'","offer_id":48989560701081,"sku":"ABH490410","price":3699.92,"currency_code":"USD","in_stock":true},{"title":"12'","offer_id":48989560733849,"sku":"ABH490412","price":4039.76,"currency_code":"USD","in_stock":true},{"title":"14'","offer_id":48989560766617,"sku":"ABH490414","price":4862.02,"currency_code":"USD","in_stock":true},{"title":"16'","offer_id":48989560799385,"sku":"ABH490416","price":5410.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/ab-chance-swivel-hook-ladder-1-600x600.png?v=1788755983"},{"product_id":"heavy-duty-swivel-hook-ladders-14-2","title":"AB CHANCE HEAVY DUTY SWIVEL HOOK LADDERS (14″ Hooks)","description":"\u003cp\u003eEpoxiglas Hook Ladders have many applications in high voltage maintenance to position linemen in the most advantageous working location, making line repairs possible at otherwise almost inaccessible places. All hooks are formed from 1″-diameter tempered steel and can be swiveled to best fit various angles on the structure. Steel chains clip to the hooks to assist in securing the ladder to a support. Rung material for both rated ladders are 1.25″ Epoxiglas, sand coated.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMeets ASTM F711 and IEC 61478 – Category 2\u003c\/li\u003e \u003cli\u003eDesigned to effectively position linemen for high-voltage maintenance\u003c\/li\u003e \u003cli\u003eMake line repairs possible, even in inaccessible places\u003c\/li\u003e \u003cli\u003eTwo basic styles of Epoxiglas Hook Ladders are available – Regular Duty Ladders with 2″ siderails for vertical suspension applications and Heavy Duty Ladders with 2-1\/2″ siderails for tagged-out positions\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e\u003cbr\u003e\u003ch4\u003eAB CHANCE HEAVY DUTY SWIVEL HOOK LADDERS (14″ Hooks)\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eMeets ASTM F711 and IEC 61478 – Category 2\u003c\/li\u003e \u003cli\u003eDesigned to effectively position linemen for high-voltage maintenance\u003c\/li\u003e \u003cli\u003eMake line repairs possible, even in inaccessible places\u003c\/li\u003e \u003cli\u003eTwo basic styles of Epoxiglas Hook Ladders are available – Regular Duty Ladders with 2″ siderails for vertical suspension applications and Heavy Duty Ladders with 2-1\/2″ siderails for tagged-out positions\u003c\/li\u003e \u003cli\u003eHooks are formed from 1″-diameter tempered steel\u003c\/li\u003e \u003cli\u003eThese hooks can be swiveled to best fit various angles on structure\u003c\/li\u003e \u003cli\u003eLadders include 14″-dia. hooks\u003c\/li\u003e \u003cli\u003eSteel chains clip to hooks to assist in securing ladder to support\u003c\/li\u003e \u003cli\u003eRung material for both rated ladders are 1-1\/4″ sand-coated Epoxiglas\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eSales Drawings \u003c\/p\u003e","brand":"Chance","offers":[{"title":"8'","offer_id":48989561028761,"sku":"ABH49058A","price":4150.72,"currency_code":"USD","in_stock":true},{"title":"12'","offer_id":48989561061529,"sku":"ABH490512A","price":5082.4,"currency_code":"USD","in_stock":true},{"title":"16'","offer_id":48989561094297,"sku":"ABH490516A","price":5707.26,"currency_code":"USD","in_stock":true},{"title":"20'","offer_id":48989561127065,"sku":"ABH490520A","price":6864.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/ab-chance-swivel-hook-ladder-1-600x600_2c7eeb8f-3698-46e7-a827-73502dc02a4b.png?v=1788755986"},{"product_id":"heavy-duty-swivel-hook-ladders","title":"AB CHANCE HEAVY DUTY SWIVEL HOOK LADDERS","description":"\u003cp\u003eEpoxiglas Hook Ladders have many applications in high voltage maintenance to position linemen in the most advantageous working location, making line repairs possible at otherwise almost unaccessible places. All hooks are formed from 1″-diameter tempered steel and can be swiveled to best fit various angles on the structure. Steel chains clip to the hooks to assist in securing the ladder to a support. Rung material for both rated ladders are 1.25″ Epoxiglas, sand coated.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMeets ASTM F711 and IEC 61478 – Category 2\u003c\/li\u003e \u003cli\u003eDesigned to effectively position linemen for high-voltage maintenance\u003c\/li\u003e \u003cli\u003eMake line repairs possible, even in inaccessible places\u003c\/li\u003e \u003cli\u003eTwo basic styles of Epoxiglas Hook Ladders are available – Regular Duty Ladders with 2″ siderails for vertical suspension applications and Heavy Duty Ladders with 2-1\/2″ siderails for tagged-out positions\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e\u003cbr\u003e\u003ch4\u003eAB CHANCE HEAVY DUTY SWIVEL HOOK LADDERS\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eMeets ASTM F711 and IEC 61478 – Category 2\u003c\/li\u003e \u003cli\u003eDesigned to effectively position linemen for high-voltage maintenance\u003c\/li\u003e \u003cli\u003eMake line repairs possible, even in inaccessible places\u003c\/li\u003e \u003cli\u003eTwo basic styles of Epoxiglas Hook Ladders are available – Regular Duty Ladders with 2″ siderails for vertical suspension applications and Heavy Duty Ladders with 2-1\/2″ siderails for tagged-out positions\u003c\/li\u003e \u003cli\u003eHooks are formed from 1″-diameter tempered steel\u003c\/li\u003e \u003cli\u003eThese hooks can be swiveled to best fit various angles on structure\u003c\/li\u003e \u003cli\u003eLadders include 8″-dia. hooks\u003c\/li\u003e \u003cli\u003eSteel chains clip to hooks to assist in securing ladder to support\u003c\/li\u003e \u003cli\u003eRung material for both rated ladders are 1-1\/4″ sand-coated Epoxiglas\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eSales Drawings \u003c\/p\u003e","brand":"Chance","offers":[{"title":"8'","offer_id":48989561389209,"sku":"ABH49058","price":3879.62,"currency_code":"USD","in_stock":true},{"title":"10'","offer_id":48989561421977,"sku":"ABH490510","price":4429.79,"currency_code":"USD","in_stock":true},{"title":"12'","offer_id":48989561454745,"sku":"ABH490512","price":4904.69,"currency_code":"USD","in_stock":true},{"title":"14'","offer_id":48989561487513,"sku":"ABH490514","price":5440.08,"currency_code":"USD","in_stock":true},{"title":"16'","offer_id":48989561520281,"sku":"ABH490516","price":6118.87,"currency_code":"USD","in_stock":true},{"title":"18'","offer_id":48989561553049,"sku":"ABH490518","price":6790.82,"currency_code":"USD","in_stock":true},{"title":"20'","offer_id":48989561585817,"sku":"ABH490520","price":7202.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/ab-chance-swivel-hook-ladder-1-600x600_19fdd346-1e33-47d6-a83e-39d6214ceb50.png?v=1788755988"},{"product_id":"2-rail-spliced-ladders-10-middle","title":"AB CHANCE 2 RAIL SPLICED LADDERS, 10′ Middle Section","description":"\u003cp\u003eChance Epoxiglas Spliced Ladders are available in combinations of up to 32 feet in 2.5″ diameter side rails, all splices are interchangeable, thus offering a variety of total reach with a few ladder sections in more convenient transportation lengths. One-inch diameter steel rods, 8″ in diameter, are arched to hook over structural shapes are furnished on all top section units. The hooks are complete with steel chains- larger hooks are available on special order. Heavy-duty Chance Epoxiglas Ladders, manufactured in short, easy-to-transport lengths, are joined with the Chance Rigid Ladder Splice to form an unshakable, rigid splice- two eye pins in each rail, with a klik pin in the end of each are supplied.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMeets ASTM F711 and IEC 61478 – Category 2\u003c\/li\u003e \u003cli\u003eAvailable in combinations of up to 32’ in 2-1\/2″-dia. side rails\u003c\/li\u003e \u003cli\u003eAll splices are interchangeable, offering a variety of total reach\u003c\/li\u003e \u003cli\u003eAvailable in various section lengths for convenient transport\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e\u003cbr\u003e\u003ch4\u003eAB CHANCE 2 RAIL SPLICED LADDERS, 10′ Middle\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eMeets ASTM F711 and IEC 61478 – Category 2\u003c\/li\u003e \u003cli\u003eAvailable in combinations of up to 32’ in 2-1\/2″-dia. side rails\u003c\/li\u003e \u003cli\u003eAll splices are interchangeable, offering a variety of total reach\u003c\/li\u003e \u003cli\u003eAvailable in various section lengths for convenient transport\u003c\/li\u003e \u003cli\u003eHooks are made of 1″ diameter steel and have an 8″ diameter arch to hook over structural shapes\u003c\/li\u003e \u003cli\u003eHooks are complete with steel chains\u003c\/li\u003e \u003cli\u003eLarger hooks are available on special order\u003c\/li\u003e \u003cli\u003eHeavy-duty Chance Epoxiglas Ladders, manufactured in short, easy-to-transport lengths, are joined with Chance Rigid Ladder Splice to form unshakable, rigid splice\u003c\/li\u003e \u003cli\u003eTwo eye pins with a klik pin in the end of each are supplied with each splice\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eSpecsheet\u003c\/p\u003e","brand":"Chance","offers":[{"title":"Default Title","offer_id":48989561815193,"sku":"ABT4020423","price":4438.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/acr26792305962880681785.jpg?v=1788755991"},{"product_id":"2-rail-spliced-ladders-12-bottom","title":"AB CHANCE 2 RAIL SPLICED LADDERS, 12′ Bottom Section","description":"\u003cp\u003eChance Epoxiglas Spliced Ladders are available in combinations of up to 32 feet in 2.5″ diameter side rails, all splices are interchangeable, thus offering a variety of total reach with a few ladder sections in more convenient transportation lengths. One-inch diameter steel rods, 8″ in diameter, are arched to hook over structural shapes are furnished on all top section units.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMeets ASTM F711 and IEC 61478 – Category 2\u003c\/li\u003e \u003cli\u003eAvailable in combinations of up to 32’ in 2-1\/2″-dia. side rails\u003c\/li\u003e \u003cli\u003eAll splices are interchangeable, offering a variety of total reach\u003c\/li\u003e \u003cli\u003eAvailable in various section lengths for convenient transport\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e\u003cbr\u003e\u003ch4\u003eAB CHANCE 2 RAIL SPLICED LADDERS, 12′ Bottom Section\u003c\/h4\u003e \u003cp\u003eThe hooks are complete with steel chains- larger hooks are available on special order. Heavy-duty Chance Epoxiglas Ladders, manufactured in short, easy-to-transport lengths, are joined with the Chance Rigid Ladder Splice to form an unshakable, rigid splice- two eye pins in each rail, with a klik pin in the end of each are supplied.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMeets ASTM F711 and IEC 61478 – Category 2\u003c\/li\u003e \u003cli\u003eAvailable in combinations of up to 32’ in 2-1\/2″-dia. side rails\u003c\/li\u003e \u003cli\u003eAll splices are interchangeable, offering a variety of total reach\u003c\/li\u003e \u003cli\u003eAvailable in various section lengths for convenient transport\u003c\/li\u003e \u003cli\u003eHooks are made of 1″ diameter steel and have an 8″ diameter arch to hook over structural shapes\u003c\/li\u003e \u003cli\u003eHooks are complete with steel chains\u003c\/li\u003e \u003cli\u003eLarger hooks are available on special order\u003c\/li\u003e \u003cli\u003eHeavy-duty Chance Epoxiglas Ladders, manufactured in short, easy-to-transport lengths, are joined with Chance Rigid Ladder Splice to form unshakable, rigid splice\u003c\/li\u003e \u003cli\u003eTwo eye pins with a klik pin in the end of each are supplied with each splice\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eSpecsheet\u003c\/p\u003e","brand":"Chance","offers":[{"title":"Default Title","offer_id":48989562077337,"sku":"ABC4020422","price":4901.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/acr26792305962880681785_0fd58b37-d791-4b7e-8651-720103116249.jpg?v=1788755993"},{"product_id":"2-rail-spliced-ladders-10-bottom","title":"AB CHANCE 2 RAIL SPLICED LADDERS, 10′ Bottom Section","description":"\u003cp\u003eChance Epoxiglas Spliced Ladders are available in combinations of up to 32 feet in 2.5″ diameter side rails, all splices are interchangeable, thus offering a variety of total reach with a few ladder sections in more convenient transportation lengths. One-inch diameter steel rods, 8″ in diameter, are arched to hook over structural shapes are furnished on all top section units.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMeets ASTM F711 and IEC 61478 – Category 2\u003c\/li\u003e \u003cli\u003eAvailable in combinations of up to 32’ in 2-1\/2″-dia. side rails\u003c\/li\u003e \u003cli\u003eAll splices are interchangeable, offering a variety of total reach\u003c\/li\u003e \u003cli\u003eAvailable in various section lengths for convenient transport\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e\u003cbr\u003e\u003ch4\u003eAB CHANCE 2 RAIL SPLICED LADDERS, 10′ Bottom Section\u003c\/h4\u003e \u003cp\u003eThe hooks are complete with steel chains- larger hooks are available on special order. Heavy-duty Chance Epoxiglas Ladders, manufactured in short, easy-to-transport lengths, are joined with the Chance Rigid Ladder Splice to form an unshakable, rigid splice- two eye pins in each rail, with a klik pin in the end of each are supplied.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMeets ASTM F711 and IEC 61478 – Category 2\u003c\/li\u003e \u003cli\u003eAvailable in combinations of up to 32’ in 2-1\/2″-dia. side rails\u003c\/li\u003e \u003cli\u003eAll splices are interchangeable, offering a variety of total reach\u003c\/li\u003e \u003cli\u003eAvailable in various section lengths for convenient transport\u003c\/li\u003e \u003cli\u003eHooks are made of 1″ diameter steel and have an 8″ diameter arch to hook over structural shapes\u003c\/li\u003e \u003cli\u003eHooks are complete with steel chains\u003c\/li\u003e \u003cli\u003eLarger hooks are available on special order\u003c\/li\u003e \u003cli\u003eHeavy-duty Chance Epoxiglas Ladders, manufactured in short, easy-to-transport lengths, are joined with Chance Rigid Ladder Splice to form unshakable, rigid splice\u003c\/li\u003e \u003cli\u003eTwo eye pins with a klik pin in the end of each are supplied with each splice\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eSpecsheet\u003c\/p\u003e","brand":"Chance","offers":[{"title":"Default Title","offer_id":48989562339481,"sku":"ABC4020421","price":4199.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/acr26792305962880681785_82211a95-364e-4d70-b44d-d8a7e47cf14b.jpg?v=1788755995"},{"product_id":"chance-2-rail-spliced-ladders-20-top","title":"AB CHANCE 2 RAIL SPLICED LADDERS, 20′ Top Section","description":"\u003cp\u003eChance Epoxiglas Spliced Ladders are available in combinations of up to 32 feet in 2.5″ diameter side rails, all splices are interchangeable, thus offering a variety of total reach with a few ladder sections in more convenient transportation lengths. One-inch diameter steel rods, 8″ in diameter, are arched to hook over structural shapes are furnished on all top section units.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMeets ASTM F711 and IEC 61478 – Category 2\u003c\/li\u003e \u003cli\u003eAvailable in combinations of up to 32’ in 2-1\/2″-dia. side rails\u003c\/li\u003e \u003cli\u003eAll splices are interchangeable, offering a variety of total reach\u003c\/li\u003e \u003cli\u003eAvailable in various section lengths for convenient transport\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e\u003cbr\u003e\u003ch4\u003eAB CHANCE 2 RAIL SPLICED LADDERS, 20′ Top Section\u003c\/h4\u003e \u003cp\u003eThe hooks are complete with steel chains- larger hooks are available on special order. Heavy-duty Chance Epoxiglas Ladders, manufactured in short, easy-to-transport lengths, are joined with the Chance Rigid Ladder Splice to form an unshakable, rigid splice- two eye pins in each rail, with a klik pin in the end of each are supplied.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMeets ASTM F711 and IEC 61478 – Category 2\u003c\/li\u003e \u003cli\u003eAvailable in combinations of up to 32’ in 2-1\/2″-dia. side rails\u003c\/li\u003e \u003cli\u003eAll splices are interchangeable, offering a variety of total reach\u003c\/li\u003e \u003cli\u003eAvailable in various section lengths for convenient transport\u003c\/li\u003e \u003cli\u003eHooks are made of 1″ diameter steel and have an 8″ diameter arch to hook over structural shapes\u003c\/li\u003e \u003cli\u003eHooks are complete with steel chains\u003c\/li\u003e \u003cli\u003eLarger hooks are available on special order\u003c\/li\u003e \u003cli\u003eHeavy-duty Chance Epoxiglas Ladders, manufactured in short, easy-to-transport lengths, are joined with Chance Rigid Ladder Splice to form unshakable, rigid splice\u003c\/li\u003e \u003cli\u003eTwo eye pins with a klik pin in the end of each are supplied with each splice\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eSpecsheet\u003c\/p\u003e","brand":"Chance","offers":[{"title":"Default Title","offer_id":48989562536089,"sku":"ABC4020411","price":7095.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/files\/acr26792305962880681785_5fd9aedd-cb48-4fc3-8464-4ed7201e7c97.jpg?v=1788755998"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0634\/8020\/1369\/collections\/ab-chance.png?v=1788756848","url":"https:\/\/linerootsnw.com\/collections\/chance-lineman-tools.oembed","provider":"Lineroots Supply","version":"1.0","type":"link"}